2025 BAR-M ES 20SL

Stock# 43662

New 2025 Bar-M ES 20SL Bumper Pull Horse Trailer 

Model:ES 20SL

Warranty:

• 2yr-Merhow Living Quarters
• 8yr- Structural

Horse Area Standards:

• High-density horse armor lining on all walls (48” tall).
• Rear load door to have horse armor lining full height inside.
• Side access door includes rubber low and white sheet above on inside (models with access door only).
• White aluminum sheet above horse armor lining on partition wall.
• No lining or insulation on road or curb side wall.
• Cove covers to enclose the top rail on road and curb sides of the horse area.
• (1) Slim-line LED stall light per stall, installed on cove on curb side.
• Airflow dividers with stall pads on each side or every divider.
• Drop-down feed window at head side of each stall.
• Radius slider window at the butt side of each stall, including bar guards.
• (2) Horse ties in the horse area above each drop-down feed window.
• (2) Horse ties in the horse area above access door (models with access door only).
• Rear door single with two slider windows.

Exterior Standards:

• Rear door single with cam bar.
• Rear docking bumper below the rear doors.
• Running boards on road and curb sides.
• Single load light with switch in rear hoop above curb side load door (Powered by recharge line).
• License plate light over the road side tack room door.
• Location for license plate on road side tack room door up high.
• Complete automotive-style wire harness.
• (1) Set of LED turn/stop/tail-lights, low on each side of the unit.
• (1) LED ID bar centered on rear hoop top (left/right turn, stop, and tail lights).
• (1) Switch in rear hoop for the stall lights.
• Aluminum fender with top-side mounted fender light.
• (1) Exterior horse tie per stall.
• Drop-down feed window hold-down (1) at each drop-down feed window.
• Door hold-back on each of the rear doors and (1) at access door if applicable.
• Three-piece skin-colored nose sheet (center sheet is riveted at the seams).
• Large Bar-M nose decal (centered on unit, up high, center sheet is riveted).
• (2) Red reflectors – one installed on road side rear, one on curb side rear, mid-way up.
• (2) Amber reflectors – one installed on road side front, one on curb side front, mid-way up.
• (2) Amber reflectors – one installed on road side nose, one on curb side nose, just below top rail.
• Bar-M logo on top rail, both road and curb sides near the rear of the trailer on the top rail.
• Bar-M logo installed on curb side door, down lower curb side of door.
• Red/white conspicuity tape along the entire bottom side of road and curb side rear doors.
• Red/white conspicuity tape along the lower side of road and curb side walls (in sections).
• Top crank jack with wheel.
• Coupler for 2 5/16" ball, safety cables, emergency break-away battery (with charger) and switch.
• Diamond plate nose guard.

Optional Equipment List:

• Ramp behind full-height rear doors.
• 6' Hay-rack (No floor).
• Upgrade the butt window in the 1st stall.
• Upgrade the butt window in the 2nd stall.
• Upgrade the butt window in the 3rd stall.
• Add an additional load light centered over the roadside horse area.
• Add an additional load light centered over the curbside horse area.
• Add an additional load light centered over the roadside rear tack door.
• Add a walk-thru door in the partition wall between the horse area and the dressing room.
• Add a Bauer cam back lock box (price per box).
• Add a 3-tier aluminum blanket bar on the rear tack room door.
• Add an additional set of (8) bridle hooks in the dressing room.
• Add an additional set of (8) bridle hooks in the rear tack.
• Add an additional saddle seat to the saddle rack (max is 6; price is per seat).
• Add an additional brush box to the rear tack.
• Add an additional brush box to the dressing room.
• Charcoal skin upgrade from white skin.
• Extruded slat in the horse area (2 Horse).
• Extruded slat in the horse area (3 Horse).
• Upgrade to aluminum wheels (Does not include the spare).
• Add an access door in the first stall, head side (2 Horse model only).
• Add a lower divider on the first divider.
• Replace the full-height cam bar on the access door with a camper door handle and butterfly latch.
• Add 7” of length to dressing area, make trailer 7’ tall, make dressing room door 36” (Trailer cannot be over 11’1” tall).
• Add a swing-out saddle rack with a blanket bar below each rack.
• Add hat rack and clothes rod.
• Delete the rubber mats from the horse area.
• Add an electric jack with battery and battery box.
• Remove rear tack, make rear door single with two windows, line and insulate above kit liner.
• Add carpet to the slant wall lower bridle hooks 1' lower.
• No roof vents for clearance issues.
• Add extra light to dressing area (total of 2) with an exterior switch.
• Add additional load light over the dressing room door with an exterior switch.
• Trailer will have two load lights over the rear door with an exterior switch.
• Upgrade spare to an aluminum wheel.

We offer outstanding financing options, accept trades, and can arrange nationwide NO HASSLE delivery!

Inquire today for more information! (888) 333-6613

**We believe these specifications to be accurate. Any discrepancies are unintentional. Please verify information with a sales associate prior to purchase.**