2024 Merhow 2+1 Horse Gooseneck

#031134 

Structural & Material Features

• Aluminum sidewall posts, top rail, rear hoop, bottom rail
• 4" Cross members, typically on 114" centers
• Extruded aluminum floor
• One-piece aluminum roof
• White, .040 exterior aluminum skin
• Mil finish aluminum slat on exterior horse area only
• Rock guard
• Lower section of horse area walls lined with ballistic liner
• .100 aluminum wall reinforcement behind the ballistic wall liner on the walls in the +1 stall of the 7200 2+1 model
• Horse area walls covered in white aluminum above ballistic
• Tapered inside wheel wells (8 wide models only)
• Rubber covered wheel wells (8 wide models only)
• Aluminum fenders with side marker light
• 2 Year hitch to bumper to hitch warranty
• 8 Year warranty on the structure

Horse Area Features

• Padded dividers with air flow shoulder sections
• Aluminum butt bar with pad for each stall
• Stud doors between horse stalls & box stall on Carriage trailer & 2+1 models
• Full height gate at the front side of each stall between the straight load stalls and the box stall (7200 2+1 model)
• Bar guards on inside of all horse area windows
• Rubber mats in horse area and rear tack
• Rubber mats on dressing room floor
• LED 12V Light at each horse stall (2 lights in the +1 stall of the 7200 2+1 model)
• (1) set of 8 heavy-duty bridal hooks in the dressing room
• Feed bag rings at all stalls (deleted when mangers are added)
• 2) 2-way vents in the +1 stall of the 7200 2+1 & carriage area of carriage model
• 1) 2-way roof vent per horse stall, other than exceptions listed above
• Interior & exterior horse ties standard per horse stall

Windows & Vents

• 44" X 20" window for each horse stall
• (2) 26" X 74" access doors with 20" X 20" windows at front side of each stall, (1) curb side and (1) road side for the (2H STR BP & GN models)
• 30" X 74" dressing room door with window (for 4 horse HTH, 7200 2+1, 2 horse Straight load BP & GN models)
• 32" X 24" Sliding window at the head side of each stall, (1) on the curb & (1) on road side in the 7200 2+1 GN model
• 60" Wide side ramp with single door above ramp for the following models: 7200 2+1, 4 Horse HTH, Carriage trailer (includes a 20" X 14" window in top door)
• Window in each of the rear tail doors
• (2) 2-way vents in the +1 stall of the 7200 2+1 & carriage area of carriage model

Doors & Latches

• Wrap-around hinges on rear doors with a hold back per door
• Ramp with tail doors at the rear of the trailer
• Drip rail above rear doors
• Cam bar on each rear tail door (without locking paddle latch)
• Drip guard above dressing room door
• Plant-made escape door on R.S. of the +1 stall of the 7200 2+1 model & Carriage trailer
• Butterfly latch & paddle latch on escape door of the +1 stall of the 7200 2+1 model
• 32" X 24" Sliding window at the head side of each stall, (1) on the curb & (1) on road side in the 7200 2+1 GN model

Towing & Suspension

• 2 5/16" Coupler
• Manual crank, single speed leg with drop foot on GN models
• 0° Dexter EZ-Lube torsion axles
• Electric brakes on all wheels
• Steel wheels standard with aluminum wheel options
• Spare steel wheel and tire standard
• Break-away emergency brake system & safety chains

Interior & Storage Features

• Brush box in the dressing room
• Removable saddle post in dressing room
• (1) Saddle Boss and (1) blanket bar per horse stall
• (1) 12V load light over rear curb side horse loading door
• Carpet on riser wall and bunk floor of GN models

Lighting & Electrical Features

• LED exterior clearance lights (including upper and lower)
• (2) Sets of LED stop/tail lights
• 8-Way bargeman cord for trailer lights

Other Features

• Drive on trailer tire changing assistant