2025 BAR-M SS720 HS

Stock# 41865

New 2025 Bar-M SS720 HS Bumper Pull Horse Trailer 

At Bar-M Trailers, we value creativity, innovation, and durability. We believe in creating products that are not only good for the animals but also benefit the user. We are proud to be built in the USA!

Model:SS720 HS

Warranty:

• 7yr-Structural

Standard Features

Frame and Structure Standards

• Aluminum frame
• Aluminum sidewall posts and aluminum roof bows
• Sidewall posts are 1 1/2" deep and typically on 16" centers
• Unit height: 7'-6"
• Flooring cross members (commonly on 14" centers)
• 2X6 Pressure-treated wood floor
• One-piece, seamless aluminum roof
• Exterior aluminum skin (.040", white is standard)
• Dexter Spring axles (3,500 pounds standard)
• Electric brakes on all axles
• (4) Steel wheels & (1) steel wheel for spare (15” LR D)
• Spare tire installed inside dressing room
• Heavy-duty 2 5/16” coupler with safety chains

Horse Area Interior Standards

• HDPE smooth black high-impact wall liner on road side and curb side of horse area
• HDPE smooth black high-impact wall liner on rear side of swing wall to dressing room
• Large, single, radius corner, sliding/drop-down window on curb side walls in horse area
• Radius corner drop-down feed door at each stall on the road side
• Large, single, radius corner, sliding/drop-down window in the single rear swing door
• (1) Slim-line LED stall light per stall installed in cove on the curb side
• Swinging partition between front horse stall and dressing room
• (1) Horse tie per stall, installed on road side up high
• (1) Horse divider between each stall
• Stall spacing set at 42” between stalls

Exterior Standards

• (1) Exterior horse tie on curb side rear hoop, (2) @ (3) horse models
• (1) Exterior horse tie on road side rear hoop, (2) @ (3) horse models
• (1) Exterior horse tie on the road side roughly 4' forward of the rear of trailer (3 horse models)
• Lockable entry door with window to the dressing room on curb side
• Single swinging rear door with large, single, radius corner, sliding/drop-down window
• Single swinging rear door with (4) hinges on curb side & single aluminum cam bar road side
• Drip cap above dressing room door made from aluminum angle
• License plate light located curb side of the rear door, toward the lower section of the trailer
• Location for license plate on curb side of rear door, down low
• Single set of LED turn/stop/tail-lights installed about 18” above horse area floor
• (1) Door tie-back on the rear swinging door and (1) on the side dressing room door
• Tear-drop style aluminum fender with top side-mounted fender light
• Three-piece skin-colored nose sheet; sheets are riveted at seams and center posts
• Large Bar-M nose decal centered on unit, up high
• (2) Red reflectors: One installed on road side rear and one on curb side rear, mid-way up
• (2) Amber reflectors: One installed on road side front and one on curb side front, mid-way up
• (2) Amber reflectors: One installed on road side nose and one on curb side nose, just below top rail
• Bar-M Logo on top rail; both road and curb sides near the rear of the trailer on the top rail
• Bar-M Logo on road side rear swinging door; installed between the air gaps on the sheet
• Bar-M Logo installed on curb side dressing room door, down lower forward side of door
• Red/White conspicuity tape along the entire bottom side of road and curb side rear doors
• Red/White conspicuity tape along the lower side of road and curb side walls (in sections)
• White conspicuity tape in an "L" shape at the top of each corner of the rear swing door
• Top crank jack installed in the coupler for the trailer
• Emergency break-away battery and switch
• Diamond plate nose guard on lower section of nose sheets
• (15) Upper clearance lights: (5) on rear, (3) on road & curb side top rail, and (4) on front nose top rail
• (2) Lower clearance lights: Down low in stone guard (1) on curb side and (1) on road side
• (2) Lower clearance lights: (1) on curb side & (1) on road side just forward of rear hoop

Optional Equipment

• Running boards
• Add a rear load light with switch in the rear hoop
• Charcoal skin upgrade from white skin
• Upgrade to an aluminum floor from a wood floor
• Upgrade to aluminum wheels (does not include the spare)
• Upgrade to 6-lug, 5,200-pound torsion axles and 16” Load Range E tires (Includes all tires; 3 Horse models only)
• Upgrade the standard 3,500-pound sprung axles to 3,500-pound torsion axles
• Add a ramp over rear doors
• Add an escape door in the first stall, head side
• Add a lower divider on the first divider

We offer outstanding financing options, accept trades, and can arrange nationwide NO HASSLE delivery!

Inquire today for more information! (888) 333-6613

**We believe these specifications to be accurate. Any discrepancies are unintentional. Please verify information with a sales associate prior to purchase.**