Posted 2008-04-22 3:43 PM (#82430 - in reply to #82421) Subject: RE: DIY door install PICS!
Veteran
Posts: 150 Location: Farmville, VA
Linda, thanks for your help! First off, I am not trying to create a LQ, just a nice comfortable day dressing room. I installed the door a little higher on the wall so that I wouldn't track as many shavings inside the dressing room. I also moved the door one full section to allow for my blanket bar to be reinstalled full size in the dressing room for my show pads to hang on. My cabnets are all the way to the corner becasue I don't have the need for a water tank inside the dressing room (it will be mounted outside under the noise) and the door opens into the horse area anyway. I also moved my brackets for the removable rear take saddle rack, so it can still be used in the dressing room should I need the extra room in the back. I reinstalled the matting to the door and I am going to retro fit the thick padding back also. I still need to add the trim to the dressing room side. I used the trailer this past week end and was very pleased. Now that the insulation is up, door installed, cabnets in, on to part two, more lights and finding a wall covering that I like!
DIY door install PICS!
I also have done my own DIY door.