'
1
Forums Albums Skins 1
Search Register Logon


You are logged in as a guest. Logon or register an account to access more features.
OTHER FORUMS:    Barrel Horses  -   Trucks   -   Cutting  -   Reining  -   Roping 
'
Bee trailers, and/or galvanneal-skin trailers?

Jump to page : 1
Now viewing page 1 [25 messages per page]
Last activity 2008-04-05 5:37 AM
16 replies, 9842 views

View previous thread :: View next thread
   General Discussion -> Trailer Talk  Click to return to Barrel Talk
Refresh
Message format
 
Sharon
Reg. Mar 2004
Posted 2008-04-02 3:59 PM (#80991)
Subject: Bee trailers, and/or galvanneal-skin trailers?



Veteran


Posts: 235
10010025
Location: Bucksport, Maine

I'm really sorry, I tried to do a search on this but I guess I don't know how to do it right.  I put "Bee trailer" in the subject/body keywords and got every post ever made on this board.  Limiting it to the subject line netted nothing at all.

Can anyone point me to posts made in the past about Bee trailers, and/or galvanneal steel trailers in general?

Sorry if I seem wishy-washy on what I'm looking for... looks like the Hawk isn't going to work out so I'm checking into other options.  Bear with me!

share Top of the page Bottom of the page
gard
Reg. Aug 2007
Posted 2008-04-02 9:45 PM (#81009 - in reply to #80991)
Subject: RE: Bee trailers, and/or galvanneal-skin trailers?


Expert


Posts: 5870
50005001001001002525
Location: western PA

 There's a new left over in PA, listing #141856

Bee trailers;  check their website @ http://www.beetrailers.com/

Gard



Edited by gard 2008-04-02 9:56 PM
share Top of the page Bottom of the page
Sharon
Reg. Mar 2004
Posted 2008-04-03 8:29 AM (#81033 - in reply to #80991)
Subject: RE: Bee trailers, and/or galvanneal-skin trailers?



Veteran


Posts: 235
10010025
Location: Bucksport, Maine
Yes, that's the one I'm looking at.  They're holding it for me, in fact.  I just have to figure out whether it's a good deal versus buying a 2008... given the fact that the instant I drive it off the lot it becomes a 3yo used trailer (albeit in immaculate condition).
share Top of the page Bottom of the page
jakey1
Reg. Dec 2003
Posted 2008-04-03 9:11 AM (#81037 - in reply to #80991)
Subject: RE: Bee trailers, and/or galvanneal-skin trailers?


Extreme Veteran


Posts: 350
1001001002525
Location: Newton, NJ
Are you sure you want a steel trailer here on the East Coast???  With the cost of gas this spring, and other financial considerations in general, you might be able to find a new or nearly new aluminum trailer in the same price range.... Bee is an okay trailer - not a lot of bang for the buck, though IMO.
share Top of the page Bottom of the page
Sharon
Reg. Mar 2004
Posted 2008-04-03 9:21 AM (#81038 - in reply to #80991)
Subject: RE: Bee trailers, and/or galvanneal-skin trailers?



Veteran


Posts: 235
10010025
Location: Bucksport, Maine

No, I'm not sure, but the price is right.  It only weighs a couple hundred pounds more than the aluminum ones I've looked at, and it's at least $4k cheaper than the only brand of aluminum trailer I can buy near me (Hawk).  I'm not finding anything used that I feel is worth spending 2 days driving to go look at... and I have looked EVERYWHERE.

However, today I did get some pictures of the undercarriage, and I was surprised to see that it's got surface rust.  How bad does it look?  Do I need to apply some sort of product on a yearly basis to keep it structurally sound?

share Top of the page Bottom of the page
chadsalt
Reg. Nov 2004
Posted 2008-04-03 12:22 PM (#81050 - in reply to #80991)
Subject: RE: Bee trailers, and/or galvanneal-skin trailers?


Expert


Posts: 1416
1000100100100100
Location: sc
JMHO, but you can do better than Bee for the money.  CM and Titan immediately come to mind.  Also if I lived in Maine, I doubt I would buy a steel trailer.
share Top of the page Bottom of the page
gard
Reg. Aug 2007
Posted 2008-04-03 5:05 PM (#81073 - in reply to #80991)
Subject: RE: Bee trailers, and/or galvanneal-skin trailers?


Expert


Posts: 5870
50005001001001002525
Location: western PA

Maybe this photo will lay to rest some of the hype being presented by the steel trailer manufacturers. Here's a new GALVANNEAL trailer, that has never been used or subjected to any road salts, showing rust. Galvanneal doesn't rust? The proof is in the photo. Galvanneal is just as good as aluminum? Look at the photo.

Do all the comparisons you want about the values and longevity of steel vs. aluminum. This isn't speculation or BS, this is proof. If you go to Bee's website, they even brag about the durability and long term rust protection of their products.

Don't listen to the steel, galvanneal hype; check for yourself before you buy anything.

Gard

share Top of the page Bottom of the page
Sharon
Reg. Mar 2004
Posted 2008-04-03 5:28 PM (#81079 - in reply to #80991)
Subject: RE: Bee trailers, and/or galvanneal-skin trailers?



Veteran


Posts: 235
10010025
Location: Bucksport, Maine
Just to correct the record... the frame on this trailer is not galvanneal, it is regular steel.  The sheet metal is galvanneal and it is in pristine condition.
share Top of the page Bottom of the page
Sharon
Reg. Mar 2004
Posted 2008-04-03 5:30 PM (#81081 - in reply to #81050)
Subject: RE: Bee trailers, and/or galvanneal-skin trailers?



Veteran


Posts: 235
10010025
Location: Bucksport, Maine

Originally written by chadsalt on 2008-04-03 12:22 PM

...CM and Titan immediately come to mind.  Also if I lived in Maine, I doubt I would buy a steel trailer.

I just heard back from a Titan dealer that their frame is steel too, just like Bee.  I'm not arguing, I'm just sayin'. 

share Top of the page Bottom of the page
chadsalt
Reg. Nov 2004
Posted 2008-04-03 6:09 PM (#81085 - in reply to #81081)
Subject: RE: Bee trailers, and/or galvanneal-skin trailers?


Expert


Posts: 1416
1000100100100100
Location: sc

Originally written by Sharon on 2008-04-03 6:30 PM

Originally written by chadsalt on 2008-04-03 12:22 PM

...CM and Titan immediately come to mind.  Also if I lived in Maine, I doubt I would buy a steel trailer.

I just heard back from a Titan dealer that their frame is steel too, just like Bee.  I'm not arguing, I'm just sayin'. 

 

You misunderstand, if I were buying steel I would be more interested in Titan or CM.

I was also saying, If I were in your shoes I wouldnt by a steel trailer to start with.



Edited by chadsalt 2008-04-03 6:15 PM
share Top of the page Bottom of the page
Sharon
Reg. Mar 2004
Posted 2008-04-03 6:16 PM (#81088 - in reply to #80991)
Subject: RE: Bee trailers, and/or galvanneal-skin trailers?



Veteran


Posts: 235
10010025
Location: Bucksport, Maine
OK, I get it now.  :)  Thanks for explaining.
share Top of the page Bottom of the page
horsey1
Reg. Dec 2004
Posted 2008-04-04 8:36 AM (#81132 - in reply to #80991)
Subject: RE: Bee trailers, and/or galvanneal-skin trailers?


Elite Veteran


Posts: 720
500100100
Bee makes a nice trailer. It is steel, it can rust. But it is right up there with a Titan or CM. And frankly, if its close to home from a dealer you like, I say give it & them a chance.
share Top of the page Bottom of the page
Rich M.
Reg. Sep 2005
Posted 2008-04-04 8:45 AM (#81136 - in reply to #80991)
Subject: RE: Bee trailers, and/or galvanneal-skin trailers?


Veteran


Posts: 235
10010025
Location: Keymar,Maryland

I've had steel trailers and like any construction each material has it's own quirks that you need to be aware of and monitor. I was happy with mine and if you keep up with them no problems. While not directly related to the thread, just an observation and I realize it's the forward part of the trailer not associated with the horses, I'm not crazy about what I'm seeing as far as structure ( or lack there of) in that floor system.

Rich.

share Top of the page Bottom of the page
jakey1
Reg. Dec 2003
Posted 2008-04-04 8:48 AM (#81137 - in reply to #80991)
Subject: RE: Bee trailers, and/or galvanneal-skin trailers?


Extreme Veteran


Posts: 350
1001001002525
Location: Newton, NJ

I agree with Chadsalt...  a friend of mine bought a 2H slant GN Bee trailer at about the same time I bought my similar Silver Star 2H slant GN.  He paid close to $11 grand.  I paid almost $13 - both brand new.  My trailer has an escape door that is wider than most, is fully insulated and paneled (on the ceiling of the DR and Horse area), my dividers are fully padded and his had none, his floor is wood, mine is aluminum "boards" for lack of a better description. I have a pass through door to the horse area.  He had one put in and it cost extra.  My trailer is more solid and nicer built in general.  It also has heavier duty axles. Silver star is no longer in business, but a comparable trailer is I think, a Cherokee. 

Sharon, you are correct about the galvaneal.  It is, I believe a coating/finishing process to the sheet metal covering the trailer, not a process used on the steel frame.

It's tough to purchase when you are not in a physical locale where you have much to choose from, but in the long run, if you are planning to keep this trailer for a while or may be concerned with re-sale value, I would continue to look rather than jump on the Bee.... again, just imo.

 

 

share Top of the page Bottom of the page
jakey1
Reg. Dec 2003
Posted 2008-04-04 8:49 AM (#81138 - in reply to #80991)
Subject: RE: Bee trailers, and/or galvanneal-skin trailers?


Extreme Veteran


Posts: 350
1001001002525
Location: Newton, NJ
ps.... my friend with the Bee bought it here in NJ and moved to AZ a year later.  No worries about rust out there!
share Top of the page Bottom of the page
retento
Reg. Aug 2004
Posted 2008-04-04 12:44 PM (#81171 - in reply to #80991)
Subject: RE: Bee trailers, and/or galvanneal-skin trailers?


Expert


Posts: 3802
20001000500100100100
Location: Rocky Mount N.C.

Sharon, I believe I would rather have a clean used 18 year old trailer like this one...  http://www.horsetrailerworld.com/home/trailerdetail.asp?ID=154264      Rather than a new, 3 year old steel trailer like the BEE that you posted about. But that's just me.

share Top of the page Bottom of the page
HWBar
Reg. Nov 2005
Posted 2008-04-05 5:37 AM (#81228 - in reply to #81073)
Subject: RE: Bee trailers, and/or galvanneal-skin trailers?



Expert


Posts: 1283
1000100100252525
Location: Home of Wild Turkey Whiskey
Originally written by gard on 2008-04-03 6:05 PM

Maybe this photo will lay to rest some of the hype being presented by the steel trailer manufacturers. Here's a new GALVANNEAL trailer, that has never been used or subjected to any road salts, showing rust. Galvanneal doesn't rust? The proof is in the photo. Galvanneal is just as good as aluminum? Look at the photo.

Do all the comparisons you want about the values and longevity of steel vs. aluminum. This isn't speculation or BS, this is proof. If you go to Bee's website, they even brag about the durability and long term rust protection of their products.

Don't listen to the steel, galvanneal hype; check for yourself before you buy anything.

Gard

 

 

 

Just one more example of your pie hole flapping about something you know nothing about, the underside of the trailer is not galvanneal, nor does anyone advertise the frames to be galvanneal.



Edited by HWBar 2008-04-05 5:38 AM
share Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [25 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread
Message format
 

'
Registered to: Horse Trailer World
(Delete all cookies set by this site)