Posted 2005-06-11 12:01 AM (#26365 - in reply to #26364) Subject: RE: rumber floors
Expert
Posts: 1989
Location: South Central OK
I think just about any maker can have rumber put in a trailer upon request. I know several makers that have it as an option on the option list. There are MANY choices in todays marketplace and I'd think they'd do just about anything to get your $$$$!
Posted 2005-06-12 4:21 PM (#26411 - in reply to #26364) Subject: RE: rumber floors
New User
Posts: 3
Location: Ga,
My understanding is that it is solid rubber trailer flooring; no wood boards, no aluminum plates, no need for rubber mats - and it has a 20 yr warranty
Posted 2005-06-12 9:36 PM (#26428 - in reply to #26364) Subject: RE: rumber floors
Expert
Posts: 1989
Location: South Central OK
Rumber is basically rubber formed into planks. It looks black and can be cut and used just like wood boards. It ends the need for stall mats and I believe it claims to last forever. Similar products can be used for decking material. I believe one component is recycled tires, but I could be wrong.
Posted 2005-06-12 10:13 PM (#26431 - in reply to #26364) Subject: RE: rumber floors
Expert
Posts: 2955
Location: North Carolina
Huntseat is correct ..
Rumber is rubber from reclaimed tires, mixed with scrap plastic as a binder and extruded into planks. It is NOT the same as Werm flooring or Sundowner's suncoat.
While the Rumber may not rot from the end products of the horse, the metal supports holding the Rumber will eventually succumb. It is not (IMHO) a substitute for cleaning your trailer after use.
Posted 2005-06-13 7:37 AM (#26438 - in reply to #26431) Subject: RE: rumber floors
Regular
Posts: 61
Location: Indiana
Rumber is not a substitute for cleaning your trailer floor BUT you do not have to lift the mats again to ensure a good cleaning.
Pros:20 year warranty, Closer crossmembers(15" centers max), only has a .008% water absorption(will not store horse urine in it), like previously said no more rubber mats, & last but not least about another 1/2" to 1" (depending on manufactures) of clearance in the horse area.
Cons:A bit more expensive and the rough surface makes it just a bit harder to clean off with a broom but still doable
I know which one out weights the other for me but it's all there for you do decide.
Posted 2005-07-01 10:33 PM (#27511 - in reply to #26364) Subject: RE: rumber floors
New User
Posts: 1
Location: Yorktown, VA
Rumber is used by Hawk trailers. They are very nice trailers and sold at a fair price. I like them mostly because they are tall (7'6"), they have a window between the dressing room and stalls, and they have a fiberglass roof. I went to a dealership today to look at them and the saleperson gave me a chunk of rumber to take home and play with.
Posted 2005-07-03 8:00 AM (#27537 - in reply to #26364) Subject: RE: rumber floors
Expert
Posts: 2453
Location: Northern Utah
I had Rumber in my 2000 Classic 3 horse gooseneck.
My horses were in and out of that trailer at least twice a week. They are 16 hand geldings around 1100-1200 lbs each and they were steel shoes 8 months of the year. A lot of trips where the horses were in there for 6 to 10 hours at a time. Every month I swept it out and put in a new bale of shavings. Twice a year I got a high pressure hose and washed it out good.
After 5 years I sold my trailer this past week and the floor still looked like great. The only wear was were the horses stood the small grooves (texture) was slighly worn down.
Posted 2005-07-03 9:26 AM (#27543 - in reply to #26364) Subject: RE: rumber floors
Expert
Posts: 1416
Location: sc
i dont have it for my floors, but i put it on the walls. 3/8" on the butt wall and rear gate, 3/16" on the slant. i took a scrap piece of 3/16" and a 24oz. ball peen hammer and gave it what for. 5 or 6 blows only left a few dents, same treatment to a 1"x6" i had, split it after 2 blows. from this semi-scientific experiment i would have to conclude a 1 1/2" piece of rumber on the floor would be nearly indestructable with normal use. ill certainly look into it for my new floor when the times comes.