Posted 2005-04-09 12:32 AM (#23600 - in reply to #23586) Subject: RE: Subfloor ready to install
Member
Posts: 39
Location: Covington, Louisiana
A question just out of curiosity. Are you using pressure treated plywood for the bottom layer of your floor? I'm in the process of replacing the floor in the tack room area of my trailer and am trying to decide on the best material to use. Thanks
Posted 2005-04-10 12:25 PM (#23636 - in reply to #23600) Subject: RE: Subfloor ready to install
Veteran
Posts: 140
Location: Colorado
I couldn't find decent looking pressure treated plywood, so no, we are installing regular exterior rated plywood that we are coating with asphalt emulsion.
Posted 2005-04-10 1:53 PM (#23639 - in reply to #23586) Subject: RE: Subfloor ready to install
Member
Posts: 39
Location: Covington, Louisiana
Michelle Thanks for your reply. Since mine is only a small (6' X 8') dressing room, and appearance and insultaion are not as much a concern, I will probably use two layers of 3/4" Pressure treated plywood with a sheet vinyl floor covering on top. Thanks again Russ