Posted 2014-11-18 3:18 PM (#161656 - in reply to #161655) Subject: RE: stall divider
Veteran
Posts: 124 Location: Calgary, Canada
I have removed the dividers on our 2006 Hart 3H gooseneck. Was pretty straight forward ... I recall the stud stall had 3 pins ... one pin includes a spring ... just pounded the three pins straight up with a hammer and drift punch (you could use a hammer and nail also). Have someone hold the stall while you do this, the stud stall was quite heavy (over 100 lbs). The regular divider had two pins I recall ... one pin includes a spring ... again drift the pins straight up and out. Regards, 3CW
Posted 2014-11-18 3:21 PM (#161657 - in reply to #161655) Subject: RE: stall divider
Veteran
Posts: 124 Location: Calgary, Canada
I should also add to drift the pin with the spring out first. This way the stall will still be pinned and you are not fighting the spring. Regards,
3CW
stall divider
