Posted 2012-01-31 10:58 AM (#140443) Subject: putting in electric box inside GN Elite trailer
New User
Posts: 2
Location: kiefer, ok
Please give electric work advise on the safest, eaiest, way to put in electrical box for inside GN dressing room on 2008 elite mustang trailer. Thanks colleen
its for light, heater, refrig for camping.
Posted 2012-01-31 3:43 PM (#140451 - in reply to #140443) Subject: RE: putting in electric box inside GN Elite trailer
Extreme Veteran
Posts: 402 Location: Valentine, NE
Depends on a lot. No way to really say with info provided. Have seen everything from a surge protector with cord thru wall to run to shore power to lined/insulated, converter boxes, etc on top of the line trailers.
Have seen a lot of non-insulated LQ with hard wired ACs, with an outlet and a light available, still use a RV wall 20 amp plug hard wired to a small breaker box. No battery charger, generator, converter, etc. used. This is about as basic as you should go IMO.
I suggest only qualified people install it no matter how basic. Even the best electrical system will still get fried as you never know what you will plug into at all the places one vists. MAKE SURE THEY ARE RV QUALIFIED. House wiring this is not!!!
putting in electric box inside GN Elite trailer
