'
1
Forums Albums Skins 1
Search Register Logon


You are logged in as a guest. Logon or register an account to access more features.
OTHER FORUMS:    Barrel Horses  -   Trucks   -   Cutting  -   Reining  -   Roping 
'
How much will my 08 6.4L Pull

Jump to page : 1
Now viewing page 1 [25 messages per page]
Last activity 2011-05-19 9:16 AM
5 replies, 4550 views

View previous thread :: View next thread
   General Discussion -> Trailer Talk  Click to return to Barrel Talk
Refresh
Message format
 
TRanch
Reg. May 2011
Posted 2011-05-18 2:14 PM (#134200)
Subject: How much will my 08 6.4L Pull


New User


Posts: 2

I have a 2008 f250 6.4L crew cab 4x4 and i have air bags on it as well, i currently pull a 3h 11' platinum but am wondering if it will pull a 4h 12' elite? any advice would be greatly appreciated, thanks
share Top of the page Bottom of the page
retento
Reg. Aug 2004
Posted 2011-05-18 2:30 PM (#134201 - in reply to #134200)
Subject: RE: How much will my 08 6.4L Pull


Expert


Posts: 3802
20001000500100100100
Location: Rocky Mount N.C.

What is the pin weight of the Elite fully loaded..?? Is your GVWR 9800# or 10000#? Your pay load capacity will be between 2950# and 3160#, depending on if your truck is two or four wheel drive, 8' bed-vs-6.5' bed, etc. Your GCVWR is 23500#.... Need to know that pin weight, but it will probably be pushing the maximum of the F-250. Back under the trailer, take it to a scale and weigh it, that's the only way you'll know for sure.....

 

share Top of the page Bottom of the page
Painted Horse
Reg. May 2005
Posted 2011-05-18 3:06 PM (#134202 - in reply to #134200)
Subject: RE: How much will my 08 6.4L Pull



Expert


Posts: 2453
20001001001001002525
Location: Northern Utah

If the 12 foot that you reference is a 12' LQ.  I'll venture that it will be over your pin weight.

Your truck can probably pull the GCVW. But a 12'LQ with 4 horses will more than likely overload your truck's load limits and actually be in the range of F350 Dually.

As mentioned above. The only way you will know is to load the trailer and drive across a scale and see how much it actually weighs on your gooseneck hitch.

share Top of the page Bottom of the page
PaulChristenson
Reg. Jan 2007
Posted 2011-05-18 4:28 PM (#134204 - in reply to #134200)
Subject: RE: How much will my 08 6.4L Pull


Expert


Posts: 3853
200010005001001001002525
Location: Vermont
Originally written by TRanch on 2011-05-18 2:14 PM

I have a 2008 f250 6.4L crew cab 4x4 and i have air bags on it as well, i currently pull a 3h 11' platinum but am wondering if it will pull a 4h 12' elite? any advice would be greatly appreciated, thanks
Maximum ALLOWABLE loaded pin weight = Truck's GVWR minus Truck's LCW The truck's laden curb weight (LCW) is the weight of the truck with driver, passengers, pets, full fuel tank, options, accessories, cargo, 5th wheel hitch, etc. The manufacturer's published curb weight is typically that of a base truck with only a 150 lb driver, so the LCW can be significantly greater than the manufacturer's curb weight.
share Top of the page Bottom of the page
TRanch
Reg. May 2011
Posted 2011-05-19 12:14 AM (#134213 - in reply to #134200)
Subject: RE: How much will my 08 6.4L Pull


New User


Posts: 2

Thanks everyone for all the help, i will get back to you.
share Top of the page Bottom of the page
danigirl
Reg. Apr 2011
Posted 2011-05-19 9:16 AM (#134219 - in reply to #134200)
Subject: RE: How much will my 08 6.4L Pull


Member


Posts: 37
25
Location: Irricana, Alberta, Canada
Love Ford and Dodge Forums! Learned a lot about trucks and tires etc. Those forums seem to know more than the salesguys and dealers. Check this one out.http://www.fordf150.net/2008/2008-ford-f250-superduty-specifications.phpGood Luck
share Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [25 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread
Message format
 

'
Registered to: Horse Trailer World
(Delete all cookies set by this site)