Posted 2008-04-15 10:12 PM (#82033) Subject: Adding a awning
New User
Posts: 2
I want to add a awning to my Exiss. I have checked various rv sites but none of them show the mounting hardware that mount to the trailer. I will need a curved piece for the top bracket. Any suggestions?
Posted 2008-04-15 10:32 PM (#82038 - in reply to #82033) Subject: RE: Adding a awning
New User
Posts: 4
Location: Springtown, Texas
I just had an awning installed by Camping World. They used a radius awning mount bracket from Dometic (component parts) # 3108907.027. Camping World's sku was # 0509. Best of luck.
Posted 2008-04-15 11:40 PM (#82040 - in reply to #82033) Subject: RE: Adding a awning
Member
Posts: 49 Location: Decatur, Texas
CAMPING WORLD ALL THE WAY!
FYI, if you are wanting a good awning for the money go with the standard awning, not the 2 step! I had the 2 step and remove it to install the standard!
The 2 step can not be used in the wind at all and the standard can be!
Posted 2008-04-30 12:09 PM (#82849 - in reply to #82033) Subject: RE: Adding a awning
Elite Veteran
Posts: 662 Location: Vanzant, Missouri
The TwoStep™ awning allows you to simply unlock it, lower and enjoy. The TwoStep™ requires no lifting, no knobs to twist or rafter to slide. Basically just a fancier awning..With the manual you unlock it, lower it, adjust the rafters on it...
Adding a awning
