Posted 2017-04-18 11:56 PM (#169790) Subject: LED Bulbs- Inside and Out
Veteran
Posts: 101 Location: Waaaaay back Slaughter Hollow
I am thinking about replacing the incandescent bulbs with LED bulbs both inside and out. From what I have read online I would not have to swap out fixtures or light assemblies themselves- just the bulbs. Anyone else do this? Positive or negative experiences?
There are a couple things I would like to achieve with this switch. Inside, I would like the light to be brighter as well as the bulbs cooler. Outside, I am interested in brightness. I have one marker light on a fender that I swear is always out when I am in the driver's seat, but it is actually on and just not very bright.
Posted 2017-04-19 8:05 AM (#169794 - in reply to #169790) Subject: RE: LED Bulbs- Inside and Out
Regular
Posts: 56 Location: Belchertown MA
I swapped all my inside ones out and went from drawing 23 amps to 3 amps with main lights on, really saves batteries. Got them all on E-bay pretty cheap just search for type of bulb base you have, G4, 1156, etc. There are different brightnesses so make sure you get what you want. I had LEDs on outside already but you may have to swap fixtures outside as most are sealed units.
Posted 2017-10-30 10:27 PM (#170783 - in reply to #169790) Subject: RE: LED Bulbs- Inside and Out
Member
Posts: 25
I put all LED in inside on my 2017 EXISS Works good . Had to change wiering in lamp fixturs so that the positive lead goes to center post of lamp you will love it got Amision
LED Bulbs- Inside and Out
