Posted 2014-09-16 9:00 AM (#160776) Subject: Cimarron fender replacement...question
Member
Posts: 40 Location: Laguna Hills, CA
Have a 2006 Cimarron Norstart (28 foot gooseneck, 8 foot wide). Anyone change a fender. i think it is just rivits and bolts, no welding. Crunched mine. Cimerron will ship me new fenders from the factory to California. Let me know if you have done it, how hard, pics etc. Thanks, Terry
Posted 2014-09-18 5:26 PM (#160826 - in reply to #160776) Subject: RE: Cimarron fender replacement...question
Regular
Posts: 87 Location: Williamsburg VA
I haven't done it, but when we purchased our trailer the dealer explained that it was simple to replace fenders as they weren't welded on. If you call them they will probably explain the process to replace the fender.
Posted 2014-09-18 7:51 PM (#160832 - in reply to #160776) Subject: RE: Cimarron fender replacement...question
Regular
Posts: 97 Location: mancelona michigan
Ive had mine off to clean behind the joint and renew the caulk line as well as extend it around the bolts. the ones on ours are held on by 6 self drill/tapping screws into the boxand 4 more to the step plates. Most of them were stripped out and not holding anything. I think they just cranked the screws up tight and figured the silicone would hold them on. Kinda shabby IMO.I'm finding a lot of that kind of thing,dont know if they are all like that or not.
Cimarron fender replacement...question
