'
1
Forums Albums Skins 1
Search Register Logon


You are logged in as a guest. Logon or register an account to access more features.
OTHER FORUMS:    Barrel Horses  -   Trucks   -   Cutting  -   Reining  -   Roping 
'
Putting things on walls

Jump to page : 1
Now viewing page 1 [25 messages per page]
Last activity 2013-06-12 7:54 AM
6 replies, 4768 views

View previous thread :: View next thread
   General Discussion -> Trailer Talk  Click to return to Barrel Talk
Refresh
Message format
 
illini
Reg. Mar 2009
Posted 2013-05-26 8:39 PM (#152255)
Subject: Putting things on walls


Veteran


Posts: 123
100
Location: illinois

I would like to hang some things on our walls in our trailer just not quite sure what is the best way to do this with the soft touch walls.  Like to have a way to hang with out doing harm to the walls(soft touch).

Thanks.

share Top of the page Bottom of the page
terri s
Reg. Sep 2005
Posted 2013-05-27 9:41 AM (#152270 - in reply to #152255)
Subject: RE: Putting things on walls


Elite Veteran


Posts: 824
500100100100
Location: Kansas
I would think you could use some of those "commando" hooks that have the 3M removable tape on them. I hang brooms and mops from mine in the laundry room and you just pull on the tab when you are ready to move or remove things. Not expensive and available at Walmarts everywhere.
share Top of the page Bottom of the page
Candy girl
Reg. Apr 2006
Posted 2013-05-28 2:46 PM (#152293 - in reply to #152255)
Subject: RE: Putting things on walls


Veteran


Posts: 129
10025
Location: Northwest Ohio
I thought the same thing about the Commando hooks.  I used one for a clock and it pulled the "wallpaper" away from the board leaving a bubble behind it.  Ended up having to put a screw in wall.
share Top of the page Bottom of the page
brushycreekranch
Reg. Jun 2006
Posted 2013-05-28 2:49 PM (#152294 - in reply to #152255)
Subject: RE: Putting things on walls





500100100100100
Location: Central Arkansas
I use commercial grade Velcro!
share Top of the page Bottom of the page
Fancy That
Reg. Jan 2012
Posted 2013-05-29 9:40 PM (#152326 - in reply to #152255)
Subject: RE: Putting things on walls


Regular


Posts: 70
2525
I've also used industrial velcro. Buy it in long strips and cut to please. Sticky back on the outsides. I hung an entire grooming organizer on my old trailer door that way (was afraid to "screw in" anything) I also used the 3M Commando hook, too (but not to hold anything heavy)
share Top of the page Bottom of the page
randemtam
Reg. Jun 2007
Posted 2013-06-07 4:56 PM (#152540 - in reply to #152255)
Subject: RE: Putting things on walls


Extreme Veteran


Posts: 434
10010010010025
Location: Brooksville, Fl
If your walls are soft touch you may not be able to use the 3M stuff. It's sticky and the soft touch isn't (unless I'm thinking of the wrong wall stuff!) I use the 3M on my LQ walls and it works great. When you pull it off though, you have to go right with the wall and do it slowly. I haven't had any damage thus far and I have hung a lot of pictures! I like hanging photos of our trips. This is one reason I did not choose the soft touch walls when I ordered my trailer.
share Top of the page Bottom of the page
Ncatanz
Reg. Jun 2008
Posted 2013-06-12 7:54 AM (#152641 - in reply to #152255)
Subject: RE: Putting things on walls


Veteran


Posts: 236
10010025
Location: Little town in Pa
I have the soft touch walls and the 3m comando strips have worked very well. 
share Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [25 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread
Message format
 

'
Registered to: Horse Trailer World
(Delete all cookies set by this site)