Posted 2012-04-15 1:01 PM (#143125) Subject: replacing a divider
New User
Posts: 4
Location: Gig Harbor, WA
Are dividers interchangeable? I have a Logan Coach. The divider has a solid head area, but it doesn't go back very far. My mare is very nervous in the trailer. When I close the divider, she tries to watch the back to see if I'm going to close the door. She can bend her neck and get her head behind the solid part of the divider. I would like to replace the divider with one that extends back farther, and I would really like one with bars instead of the solid wall by her head. Logan doesn't seem to make the dividers with bars, and I was wondering if I could find another manufacturer's divider would fit in my trailer?
Posted 2012-04-15 2:35 PM (#143129 - in reply to #143125) Subject: RE: replacing a divider
Extreme Veteran
Posts: 489
Originally written by Okienoodler on 2012-04-15 1:01 PM
Are dividers interchangeable? I have a Logan Coach. The divider has a solid head area, but it doesn't go back very far. My mare is very nervous in the trailer. When I close the divider, she tries to watch the back to see if I'm going to close the door. She can bend her neck and get her head behind the solid part of the divider. I would like to replace the divider with one that extends back farther, and I would really like one with bars instead of the solid wall by her head. Logan doesn't seem to make the dividers with bars, and I was wondering if I could find another manufacturer's divider would fit in my trailer?
Not sure if they are interchangable but my thought would be to find a local metal fabricator (welding shop) and have them make you exactly what you want. They can probably modify what you already have.
Posted 2012-04-20 12:40 PM (#143242 - in reply to #143125) Subject: RE: replacing a divider
New User
Posts: 4
Location: Gig Harbor, WA
I received a reply from Logan. Seems back in 2000 the company had different owners. The new Logan has changed the trailers and the dividers they make now won't fit the older trailers. So, it appears I need to go the fabricator route.
replacing a divider
