Posted 2010-07-28 12:09 PM (#122906) Subject: holding open slant divider
New User
Posts: 3
Location: Montana
I just bought a four horse slant steel trailer. I would like to have the option of holding open that last slant to put an extra horse in there form time to time. I do not want to remove the divider. Has anyone ever used a powerful magnet to hold that slant open while hauling? I may have to turn the hubby loose with the welder.
Posted 2010-07-29 10:40 AM (#122950 - in reply to #122906) Subject: RE: holding open slant divider
Veteran
Posts: 201
Problem with just tying divider back is you get a lot of bouncing going down roads and welds are stressed thus cracking and breaking. I don't know of a manufacture that will warranty this.
Posted 2010-07-29 4:59 PM (#122968 - in reply to #122906) Subject: RE: holding open slant divider
Expert
Posts: 1205
Location: Arkansas
When our slants are latched, they do not ride down onto any surface, they are suspended, as it were, in their slot.....9 years now and still suspended, same as they would be tied over to the side, looks like.
Posted 2010-07-29 7:28 PM (#122978 - in reply to #122950) Subject: RE: holding open slant divider
Veteran
Posts: 201
Location: Lincoln, NE
When looking at new Sundowners and Trails West trailers the salesman told me the warranty is invalid if the dividers are tied open. I still do it but my trailer is so old there is no longer a warranty.