Home of the Horse Trailer Blue Book

Come on in
'
1
Forums Albums Skins 1
Search Register Logon

You are logged in as a guest. Logon or register an account to access more features.
OTHER FORUMS:    Barrel Horses  -   Trucks   -   Cutting  -   Reining  -   Roping 
'
trailer wall attachment to floor question

Jump to page : 1
Now viewing page 1 [25 messages per page]		Last activity 2010-05-02 6:22 PM
4 replies, 3373 views

View previous thread :: View next thread
   General Discussion -> Trailer Talk  Click to return to Barrel Talk
Refresh
Message format
 
Safet
Reg. May 2009
Posted 2010-04-30 11:18 AM (#119544)
Subject: trailer wall attachment to floor question


Veteran


Posts: 119
100
Location: 99320		When I pulled the trailer mats out and washed the trailer, I noticed that the weld between the walls and floor is not continuous - that is - there are welds running down the length of the trailer, but it's not continuous. Is this normal, or should I be contacting the trailer company to have more welding done?

Thank you.

Edited by Safet 2010-04-30 11:19 AM
share Top of the page Bottom of the page
wyndancer
Reg. Apr 2007
Posted 2010-04-30 2:31 PM (#119554 - in reply to #119544)
Subject: RE: trailer wall attachment to floor question


Extreme Veteran


Posts: 406
100100100100
Location: Minneapolis, MN		Skip welding is very common. It really prevents warping due to thermal load being generated in a continuous bead.
share Top of the page Bottom of the page
Safet
Reg. May 2009
Posted 2010-05-02 11:14 AM (#119612 - in reply to #119544)
Subject: RE: trailer wall attachment to floor question


Veteran


Posts: 119
100
Location: 99320		Is there any specification on how far apart the welds should be and how long each welded area should be? Thanks!
share Top of the page Bottom of the page
wyndancer
Reg. Apr 2007
Posted 2010-05-02 1:17 PM (#119616 - in reply to #119612)
Subject: RE: trailer wall attachment to floor question


Extreme Veteran


Posts: 406
100100100100
Location: Minneapolis, MN		Maybe a 3" weld with somewhere between a 3"-6" skip...depends on what the builder wanted though.
share Top of the page Bottom of the page
gard
Reg. Aug 2007
Posted 2010-05-02 6:22 PM (#119628 - in reply to #119544)
Subject: RE: trailer wall attachment to floor question


Expert


Posts: 5870
50005001001001002525
Location: western PA		The amount of welds should approximate the strength of the material being used. Fabricators usually use prints and standards established by engineers. In auto body repairs, the welds are usually finished off and ground smooth for panel repairs.
share Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [25 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread
Message format
 
View previous thread :: View next thread

'
Registered to: Horse Trailer World
(Delete all cookies set by this site)