'
1
Forums Albums Skins 1
Search Register Logon


You are logged in as a guest. Logon or register an account to access more features.
OTHER FORUMS:    Barrel Horses  -   Trucks   -   Cutting  -   Reining  -   Roping 
'
Getting parts for LQ conversion from salvage campers?

Jump to page : 1
Now viewing page 1 [25 messages per page]
Last activity 2009-03-23 8:42 AM
6 replies, 7144 views

View previous thread :: View next thread
   General Discussion -> Trailer Talk  Click to return to Barrel Talk
Refresh
Message format
 
drafthorsejunkie
Reg. Oct 2008
Posted 2009-03-20 1:03 PM (#101822)
Subject: Getting parts for LQ conversion from salvage campers?


Member


Posts: 39
25
Location: Michigan

I am wondering if it would be more cost effective to try to find a salvage camper or other inexpensive used camper to do our LQ? I am not finding any resources close to us to get all the things we need, so that would help in that department as well. I figured we could use the water heater and pump, the dinette and or couch, fridge, stove microwave, etc. out of a camper.

Has anyone ever used parts from a camper to do you LQ?

Do you think it would be more/less expensive or about the same as buying everything individually?

Scrapping the left over shell isnt an issue for us, we have the resources to take care of that.

And where is a good place to find something like that? I am not seeing much on Ebay, except for some 1970's models and we want decent stuff.

share Top of the page Bottom of the page
wyndancer
Reg. Apr 2007
Posted 2009-03-20 1:50 PM (#101825 - in reply to #101822)
Subject: RE: Getting parts for LQ conversion from salvage campers?


Extreme Veteran


Posts: 406
100100100100
Location: Minneapolis, MN
I see your from Michigan?

There are numerous places not that distant from you. Bontrager's being one of them. And Elkhart Indiana just across the border....surplus and take-outs.
share Top of the page Bottom of the page
gard
Reg. Aug 2007
Posted 2009-03-20 4:29 PM (#101833 - in reply to #101822)
Subject: RE: Getting parts for LQ conversion from salvage campers?


Expert


Posts: 5870
50005001001001002525
Location: western PA

In my area, used truck campers are sold very inexpensively, with the larger units selling for less than the 8'-9' models. They have many components that can be adapted to a DIY LQ. Entire kitchens; fridge, sink, faucets, gas cook tops, ovens and a microwave are commonly installed.

A complete electrical system with converter/charger, shore cord, lighting fixtures, outlets, breaker/fuse box, etc. The bath rooms have flushing toilets and often, built in above the floor holding tanks. Some have showers and sinks. Most have dinettes with a table and cushions.

They have complete water systems, water pump, water heater, and potable water tank. Most have separate gray and black water tanks. A complete propane gas system is included, regulator, fittings, some have furnaces and most have hot water heaters. The approved exterior access panels and vents are installed for each gas appliance.

Individually these parts would cost a couple of thousand dollars new. The used market values on the older aluminum skinned units are very low, usually only few hundred dollars. The new fiberglass ones are pricy new and used, unless you can find a damaged unit.

Gard

share Top of the page Bottom of the page
gabz
Reg. Oct 2003
Posted 2009-03-20 5:14 PM (#101835 - in reply to #101822)
Subject: RE: Getting parts for LQ conversion from salvage campers?



Expert


Posts: 1391
1000100100100252525
Location: North of Detroit, MI

look on CRAIGSLISTs for areas near you... Flint, Saginaw, Detroit, etc.

2 years ago I was offered a camper to cannibalize from friends of mine in Swartz Creek - but I declined. I don't know if they still have it or not. 

Also - contact your insurance agent... see if he/she knows of any recent totalled campers/ RVs that are up for salvage.

I don't know if they are still in business .. but Adventure RV in Elba (just south of I-69 between Flint & Lapeer) used to have pieces and parts too.

Here's one near Flint for $50. Can't tell what it has or hasn't... http://flint.craigslist.org/rvs/1082740730.html

 



Edited by gabz 2009-03-20 5:20 PM
share Top of the page Bottom of the page
mingiz
Reg. Jul 2004
Posted 2009-03-22 6:24 AM (#101894 - in reply to #101822)
Subject: RE: Getting parts for LQ conversion from salvage campers?



Elite Veteran


Posts: 662
5001002525
Location: Vanzant, Missouri
Here is a link for used camper parts. I have used this site before for parts. I had an older 5th wheel(78) that I got replacement parts for. Might help you.. http://rvbasics.com/techtips/oldparts.html
share Top of the page Bottom of the page
gabz
Reg. Oct 2003
Posted 2009-03-22 10:49 AM (#101898 - in reply to #101894)
Subject: RE: Getting parts for LQ conversion from salvage campers?



Expert


Posts: 1391
1000100100100252525
Location: North of Detroit, MI

WOW Mingiz - that's a great link.

Thanks!

share Top of the page Bottom of the page
drafthorsejunkie
Reg. Oct 2008
Posted 2009-03-23 8:42 AM (#101929 - in reply to #101822)
Subject: RE: Getting parts for LQ conversion from salvage campers?


Member


Posts: 39
25
Location: Michigan
Thanks for the links and advice all!
share Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [25 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread
Message format
 

'
Registered to: Horse Trailer World
(Delete all cookies set by this site)