I bought a very lightly used (3x) 2005 Logan Coach trailer, and would like to buy a stud wall divider for the 1st/2nd stall. I talked to my local Logan Coach dealer who was unable to get one from Logan, says they don't make them anymore.
I have a posting in the wanted section of this site, but would love to hear some ideas for how I might find one. I would like to locate wrecking yards in western Washington that might have one, and have considered having one made at a local fabrication shop. But buying one would be much easier.
Posted 2006-07-05 9:46 PM (#44107 - in reply to #44101) Subject: RE: Stud wall divider
Member
Posts: 10
Location: Wabasso, MN
I have several friends that added this to their 3 and 4 horse slants. All they did was buy a rubber mat from the local tractor supply or farm supply store and bolt it to the bottom of the first divider. It keeps out the dirtiness and didn't cost a whole lot.
Posted 2006-07-06 10:37 AM (#44142 - in reply to #44107) Subject: RE: Stud wall divider
Elite Veteran
Posts: 736 Location: Western WA
On another post someone had a link to pictures of their DIY improvements to their trailer with a rubber mat stud divider. I like the idea of a rubber mat better than a metal stud wall, with rubber down by the horses legs in the 2nd stall rather than metal. Going to go buy me a rubber mat! Thanks for the idea!
Posted 2006-07-06 12:29 PM (#44151 - in reply to #44101) Subject: RE: Stud wall divider
Elite Veteran
Posts: 736 Location: Western WA
It was your site that I was looking at! I may be borrowing some of your ideas in the dressing room area too, that I hope to insulate and add some creature comforts.
Posted 2006-07-09 4:16 PM (#44291 - in reply to #44179) Subject: RE: Stud wall divider
Extreme Veteran
Posts: 524 Location: Lone Oak, Tx
Dee rings and rubber mat at Tractor Supply, shackles at Home Depot. Pretty easy to make just maneuvering the mat can be a pain. And get a sharp box knife to cut the mat.
Stud wall divider
.jpg)
