Posted 2006-07-18 1:10 PM (#44937 - in reply to #44933) Subject: RE: Hayracks
Veteran
Posts: 134 Location: Coarsegold, CA
I made my own. Holds 6 large 3 wire CA bales by design. Used 1/2" ID pipe and a thing called a "keeklamp". See keeklamp.com. I sketched it all out and ordered them. Total cost less than $300 and 3 hours time. I can e-mail photos if you are interested.
Posted 2006-07-19 12:38 AM (#45014 - in reply to #44937) Subject: RE: Hayracks
Extreme Veteran
Posts: 456 Location: south of Cowtown, TEXAS
Originally written by bechack on 2006-07-18 1:10 PM
I made my own. Holds 6 large 3 wire CA bales by design. Used 1/2" ID pipe and a thing called a "keeklamp". See keeklamp.com. I sketched it all out and ordered them. Total cost less than $300 and 3 hours time. I can e-mail photos if you are interested. Becky and the Gang
Posted 2006-07-20 11:53 PM (#45168 - in reply to #44933) Subject: RE: Hayracks
Member
Posts: 31 Location: nevada
I had the same problem.You can go to a trailer dealer they can order one.Most were about 1500.00 installed,I went to a local custom trailerbuilder they made me a 8x6 with lader for 1200.00.
Hayracks
