Posted 2007-04-13 5:38 PM (#59235) Subject: How to tie 3 in 1 rigging?
New User
Posts: 4
Location: Girard, PA
Does anyone know of a site that has pictures or any information on how to tie a 3 in 1 rigging saddle. I am VERY well versed in just the standard rigging, both using the cinch buckle and a standard tie, but my new saddle has a 3 in 1 rigging and I think that a 7/8 might be the way to go as the front rigging is too far forward. I want to combine the two riggings. Any help/suggestions would be great!
Posted 2007-04-14 3:45 AM (#59265 - in reply to #59235) Subject: RE: How to tie 3 in 1 rigging?
New User
Posts: 4
Location: Girard, PA
Thank you, but that was the point. I don't know how to set up the 7/8 tie, using both of the rings...I've seen a picture of it, but never any explanations of how to set it up. ??
Posted 2007-04-18 9:56 AM (#59530 - in reply to #59235) Subject: RE: How to tie 3 in 1 rigging?
Extreme Veteran
Posts: 560 Location: Mena, AR
The strap will be attached to the rear ring. Take the strap, run it through the ring on the grith, on the inside, up to the front ring,over the front of the ring, then back down to the grith ring,coming out in front, then back up to the rear ring, and tie if off like you would the westren rigging.Betty
How to tie 3 in 1 rigging?
