Posted 2006-05-10 9:01 PM (#41570) Subject: Just bought a 2004 Kiefer with surface rust on the frame
Member
Posts: 35 Location: Vero Beach Fl
Just bought the trailer and it has surface rust on the frame. Should we go ahead and pull the floor boards up and treat the cross rails with some type of rust treatment. Any suggestions would be appreciated on how to prevent further rust and what to do to stop the present rust.
Posted 2006-05-11 7:01 AM (#41590 - in reply to #41570) Subject: RE: Just bought a 2004 Kiefer with surface rust on the frame
Expert
Posts: 1416 Location: sc
i did/would, how hard depends on the trailer. mine were just screwed down, some have lips, overhangs, etc. that may make it a little more time consuming.
Posted 2006-05-11 7:47 AM (#41591 - in reply to #41570) Subject: RE: Just bought a 2004 Kiefer with surface rust on the frame
Extreme Veteran
Posts: 309 Location: MO
I'd pull up one board, just to check. But, plan on pulling 'em all. Rust somewhere usually means rust everywhere. Get it now before it's a real problem. You can also check out the condition of the floor boards while you're at it.
Just bought a 2004 Kiefer with surface rust on the frame
