Posted 2010-07-04 8:16 PM (#121891) Subject: Trying to wire new trailer end 7 Blade plug...sparks!
Regular
Posts: 90
OK, maybe this is normal, but the sparks startled me. I was trying to thread the wires thru the new plug and when I think Black & White touch, it sparks...should I just shove it thru?...or will I blow something up?! Sorry :( changing light bulbs makes me nervous...I'm just trying to get this done...am having a hard time finding help before a ride.
Posted 2010-07-04 10:09 PM (#121897 - in reply to #121891) Subject: RE: Trying to wire new trailer end 7 Blade plug...sparks!
Veteran
Posts: 196 Location: White Pine, TN
You might want to check the recharge line fuse which may have been blown when you had the "sparks." That's usually one of the fuses up under the hood in the distribution panel.
Posted 2010-07-08 7:20 PM (#122067 - in reply to #121897) Subject: RE: Trying to wire new trailer end 7 Blade plug...sparks!
Veteran
Posts: 178 Location: Richmond, Ky
Originally written by tobruk on 2010-07-04 11:09 PM
You might want to check the recharge line fuse which may have been blown when you had the "sparks." That's usually one of the fuses up under the hood in the distribution panel.
Excellent advice the black and white wires are normally the +12(black) and ground(white)...sparks would probably take out the fuse
Trying to wire new trailer end 7 Blade plug...sparks!
