'
1
Forums Albums Skins 1
Search Register Logon


You are logged in as a guest. Logon or register an account to access more features.
OTHER FORUMS:    Barrel Horses  -   Trucks   -   Cutting  -   Reining  -   Roping 
'
Curved Roof Question

Jump to page : 1
Now viewing page 1 [25 messages per page]
Last activity 2008-06-25 7:57 AM
4 replies, 3929 views

View previous thread :: View next thread
   General Discussion -> Trailer Talk  Click to return to Barrel Talk
Refresh
Message format
 
Rose66
Reg. Dec 2006
Posted 2008-06-01 9:26 PM (#85000)
Subject: Curved Roof Question


Veteran


Posts: 136
10025
Location: Alabama
My trailer walls curve at the top and then start the flat ceiling. Right now I'm thinking I will put plywood up to where the curve starts, then put a piece of plywood at an angle to the flat ceiling, and then put in the ceiling material. Is it feasible to angle the plywood to do away with the curve? I do not have enough head clearance in the gooseneck to put in a false/drop ceiling so that's not an option.

What have other people with curved walls done? If the angle thing would work, I am planning on putting a wall-paper border on the angled section. Thanks!


Edited by Rose66 2008-06-01 9:36 PM
share Top of the page Bottom of the page
memory
Reg. Jul 2007
Posted 2008-06-01 10:01 PM (#85004 - in reply to #85000)
Subject: RE: Curved Roof Question


Veteran


Posts: 153
1002525
Location: Iowa
What is the brand and the model?
share Top of the page Bottom of the page
cowpony01
Reg. Mar 2006
Posted 2008-06-01 10:37 PM (#85008 - in reply to #85000)
Subject: RE: Curved Roof Question



Extreme Veteran


Posts: 479
100100100100252525
Location: central sierra nevada foothills
That's how I've seen it done, like you're talking about, and it looks nice., Wish I would of done that with mine, I thought about it, as I used FRP and it doesn't bend like I wanted it, but it works for my small sleeping/tack room. You can see pics below in my siggy...........
share Top of the page Bottom of the page
rkranchgirl
Reg. Aug 2005
Posted 2008-06-02 1:34 PM (#85063 - in reply to #85000)
Subject: RE: Curved Roof Question


Regular


Posts: 58
2525
Location: Clearwater, MN

I covered mine with wood and did away with the curve.  I bought some very thin and about 8" wide pine and screwed some small furring strips lenthways along the curve to screw the pine to.  I didn't even put anything behind the pine, I just had the insulation and that was it.  I stained the pine the color of my trim and put screws where I had the furring strips.  It worked very well.  I also ran most of my wires (I wasted some length by doing this but it is eaiser) along that curve so I could access them if I ever needed to without taking the walls apart.  It was MUCH easier than dealing with the curve!!

 

Good luck!

share Top of the page Bottom of the page
imeasystreet
Reg. Apr 2008
Posted 2008-06-25 7:57 AM (#86311 - in reply to #85000)
Subject: RE: Curved Roof Question


New User


Posts: 2

I used 1/8" tempered masonite screwed to furring strips on the side walls.  On the curves in the nose I made a form to glue 2 pieces of masonite together to make "boards" in my board and batten solution.
share Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [25 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread
Message format
 

'
Registered to: Horse Trailer World
(Delete all cookies set by this site)