Posted 2012-07-13 11:05 AM (#145560) Subject: Trailer divider/partition
New User
Posts: 2
Location: California
We have a two-horse slant trailer with no divider/partition. Can anyone recommend where to purchase one or have one made? I have been searching high and low with no success. I dont understand that you cannot purchase new dividers. Any ideas on how to make one?
Posted 2012-07-13 1:05 PM (#145563 - in reply to #145560) Subject: RE: Trailer divider/partition
Veteran
Posts: 197 Location: AZ
If the trailer manufacturer is still in business, contact them..if not, then any metal fabricator can make one. you will have to take the trailer to them so they can get measurements.
Posted 2012-07-16 8:47 AM (#145613 - in reply to #145560) Subject: RE: Trailer divider/partition
Extreme Veteran
Posts: 560 Location: Mena, AR
When I got my used 2008 4-Star 2H GN I wanted a stud wall put in. The place that I happened to call had an extra Exiss divider left over that fit my trailer. They made me a really good deal on it, and it looks like it belongs.
Posted 2012-07-16 10:53 AM (#145614 - in reply to #145560) Subject: RE: Trailer divider/partition
Member
Posts: 7
Another possibility would be sealing a sheet of plywood and screwing it to the divider with self tapping screws. I've also saw people use mats as well.
Trailer divider/partition
