Posted 2022-03-27 8:20 AM (#185222) Subject: Installing Factory new window
Extreme Veteran
Posts: 420 Location: Florida
I shattered my GN window, I purchased an entire new window from Exiss. I noticed the new window has a rubber ribbed gasket. Does this mean I dont need to use butyl tape or caulk when installing? Thanks in advance Jim
Posted 2022-03-28 10:32 AM (#185225 - in reply to #185222) Subject: RE: Installing Factory new window
Elite Veteran
Posts: 720
If it goes in the stock area, it usually goes right in. If in a "dry" space, it generally will have clear caulk around the perimeter. And depending on brand, may need 2 weep holes sealed if they end up on top. Ones on bottom stay open for drainage.
Posted 2022-03-31 6:02 PM (#185228 - in reply to #185222) Subject: RE: Installing Factory new window
Extreme Veteran
Posts: 420 Location: Florida
Worked like a charm - New issue the kitchen window is leaking - can I remove the entire window toss the rubber gasket and replace with butyl tape and reseal?
Posted 2022-03-31 11:04 PM (#185229 - in reply to #185228) Subject: RE: Installing Factory new window
Expert
Posts: 2957 Location: North Carolina
I used butyl tape to reseal my windows too. The key is taking the frame out and cleaning the mating surfaces. Clear sealant across the top and sides is a good practice. Helps shed the water.
Installing Factory new window
