Posted 2019-09-21 8:58 AM (#172712) Subject: best adhesive for aluminum
New User
Posts: 3
Hey! I had a fender repaired but I still have to put the trim on the edge. I searched the forums because I know this has been answered but I couldn't find the thread.
Can someone reccomend the best adhesive to use for pvc trim to aluminum fender? Thanks
Posted 2019-09-24 8:31 PM (#172718 - in reply to #172712) Subject: RE: best adhesive for aluminum
Expert
Posts: 2958 Location: North Carolina
I've used Gorilla glue to fasten rubber seals to the doors & drops. It's water activated and foams (to fills voids) so use it sparingly. I apply it, then shut the door or window to clamp the seal against the door. It's waterproof when set.
Posted 2019-09-27 11:13 AM (#172729 - in reply to #172712) Subject: RE: best adhesive for aluminum
Elite Veteran
Posts: 720
If you are talking about Trim Lok on the lip edge of the fender, it doesn't take any glue. There is metal in it that grabs the lip. If it doesn't stick enough, squeeze it some.
Posted 2019-09-29 6:36 PM (#172732 - in reply to #172729) Subject: RE: best adhesive for aluminum
Expert
Posts: 2958 Location: North Carolina
horsey1 - 2019-09-27 12:13 PM
If you are talking about Trim Lok on the lip edge of the fender, it doesn't take any glue. There is metal in it that grabs the lip. If it doesn't stick enough, squeeze it some.
Even Trim-lok benefits with a little bit of Gorilla glue. Especially with a 19 year old trailer. (Sundowner valuelite, still hauling with me pullin' )
Posted 2019-09-30 10:22 AM (#172733 - in reply to #172712) Subject: RE: best adhesive for aluminum
Expert
Posts: 5870 Location: western PA
Two part urethane epoxies will ahere trim pieces to aluminum. In fact, the same adhesives are used by many manufacturers, to fit panels to another structure during a body build. It's a handy adhesive to have available for many uses. They are available on line or through a shop that sells automotive refinishing supplies. There are several brand names available.