'
1
Forums Albums Skins 1
Search Register Logon


You are logged in as a guest. Logon or register an account to access more features.
OTHER FORUMS:    Barrel Horses  -   Trucks   -   Cutting  -   Reining  -   Roping 
'
no power at + pin of trailer receptacle

Jump to page : 1
Now viewing page 1 [25 messages per page]
Last activity 2013-06-10 7:08 AM
5 replies, 3146 views

View previous thread :: View next thread
   General Discussion -> Trailer Talk  Click to return to Barrel Talk
Refresh
Message format
 
Show-Dad
Reg. Feb 2012
Posted 2013-06-09 6:17 PM (#152572)
Subject: no power at + pin of trailer receptacle



New User


Posts: 3

Location: East Centrsl MN
I have no power at the + pin of the trailer receptacle on my 06 Ram. So the interior lights on my trailer do not work. The trailer plug is fine,as everything works when I plug the trailer into itself ( I mounted a battery box & receptacle to be able to use the lights when the truck is not hooked up) I think this happened a couple years ago & it was a fuse, this time all the fuses appear to be good.
share Top of the page Bottom of the page
yeehaw
Reg. Mar 2010
Posted 2013-06-09 6:54 PM (#152574 - in reply to #152572)
Subject: RE: no power at + pin of trailer receptacle


Veteran


Posts: 178
100252525
Location: Richmond, Ky
you really need an ohm-meter to correctly check fuses, they really need to be removed from the circuit to be checked. If you don't have a ohm-meter a visual inspection might work, but sometimes you could miss a blown fuse.
good luck
share Top of the page Bottom of the page
MrSteve
Reg. Jul 2012
Posted 2013-06-09 6:57 PM (#152575 - in reply to #152572)
Subject: RE: no power at + pin of trailer receptacle


Veteran


Posts: 109
100
Location: Florida
Did you have the truck key to "run" when trying the inside trailer lights? My Chevy doesn't need the key on but my Ford dose, not sure how dodge is setup.
share Top of the page Bottom of the page
Show-Dad
Reg. Feb 2012
Posted 2013-06-09 7:25 PM (#152576 - in reply to #152572)
Subject: RE: no power at + pin of trailer receptacle



New User


Posts: 3

Location: East Centrsl MN
visual inspection of the fuse looked ok, swapped it out with a new one & same results. Did not check either fuse with an ohm meter. Does not make a difference if the ignition is on or off.
share Top of the page Bottom of the page
MrSteve
Reg. Jul 2012
Posted 2013-06-09 7:37 PM (#152577 - in reply to #152572)
Subject: RE: no power at + pin of trailer receptacle


Veteran


Posts: 109
100
Location: Florida
Bad relay? Give a check in the owners manual for its location.
share Top of the page Bottom of the page
yeehaw
Reg. Mar 2010
Posted 2013-06-10 7:08 AM (#152585 - in reply to #152577)
Subject: RE: no power at + pin of trailer receptacle


Veteran


Posts: 178
100252525
Location: Richmond, Ky
Originally written by MrSteve on 2013-06-09 8:37 PM

Bad relay? Give a check in the owners manual for its location.



ditto that!!!

share Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [25 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread
Message format
 

'
Registered to: Horse Trailer World
(Delete all cookies set by this site)