Posted 2012-10-21 5:07 AM (#147805) Subject: Moving the center divider
New User
Posts: 4
Location: NH
I have an Exiss 2+1 with the side ramp. I want to have the option to load my carriage from the rear.The carriage is 125 cm wide (49.2 inches) I would need to slide the divider over about 15 inches tomake this easy. The back of the divider already "slides."I want to be able to move the divider, load the carriage, and put the divider back.The front part has the pin to release it. The base of the post fits into the floor. The metal at the topand bottom of the post that fits into their "slots" is about 2 inches.So... is it possible to trim that shorter?Or...is there another type of post out there?Any other ideas.Thanks