Posted 2012-05-25 4:14 PM (#144214) Subject: Electric brakes
New User
Posts: 2
Location: Fair Oaks Ranch, TX 78015
My trailer has electric brakes with an emergency switch activated by a steel cable that you connect to the bumper of the towing vehicle. Can the switch be tested by pulling the attached steel cable and then reset or does it "break" and have to be replaced once used?
Posted 2012-05-25 5:09 PM (#144215 - in reply to #144214) Subject: RE: Electric brakes
Expert
Posts: 2958 Location: North Carolina
Welcome to the forum ... Unless the pull tab is broken, you should be able to pull the cable to test the E-brake system. (pull it straight out, pulling at an angle might break it) Push the tab back in when you're done.
Electric brakes
