'
1
Forums Albums Skins 1
Search Register Logon


You are logged in as a guest. Logon or register an account to access more features.
OTHER FORUMS:    Barrel Horses  -   Trucks   -   Cutting  -   Reining  -   Roping 
'
ONAN -How to change oil

Jump to page : 1
Now viewing page 1 [25 messages per page]
Last activity 2010-11-14 9:12 AM
4 replies, 6515 views

View previous thread :: View next thread
   General Discussion -> Trailer Talk  Click to return to Barrel Talk
Refresh
Message format
 
neugebaj
Reg. Nov 2010
Posted 2010-11-11 5:38 PM (#126956)
Subject: ONAN -How to change oil


New User


Posts: 2

Location: edwards, ms
I bought a 4 star with onan generator (4000) added after the fact (never used til I got it 4 yrs later).  Trying to change oil but don't see a drain under the trailer.  The gen sits in a big tray that looks like there is no where for the oil to go when you open up the drain plug.  How do I change it?  I see hole under the trailer where you can see a couple of bolts (but not oil drain).  Help!  Dumb female problem here!
share Top of the page Bottom of the page
retento
Reg. Aug 2004
Posted 2010-11-11 6:03 PM (#126957 - in reply to #126956)
Subject: RE: ONAN -How to change oil


Expert


Posts: 3802
20001000500100100100
Location: Rocky Mount N.C.

Welcome to HTW....!! Sounds like the generator installer should have drilled a hole in the bottom of the compartment to gain acess to the drain plug. You say the genertor is in a tray... Does the tray have a release on it so as it can be "rolled out" to acess the genset for maintenance??... You may trying to contact the trailer mfg. Here's a site with some Onan 4000 oil change tips...   http://www.rvwithtito.com/2010/02/onan-generator-oil-change.html

 http://www.cumminsonan.com/www/pdf/manuals/981-0159D.pdf



Edited by retento 2010-11-11 6:06 PM
share Top of the page Bottom of the page
flyinghfarm
Reg. Mar 2004
Posted 2010-11-12 12:52 AM (#126971 - in reply to #126956)
Subject: RE: ONAN -How to change oil


Expert


Posts: 1205
1000100100
Location: Arkansas
On ours, when I lay under the trailer looking up, through a small hole in the floor of the trailer, I see a sort of oval plate held on by two screws.  Take that plate off, and I see the oil drain plug,...I open it and let the oil drain into a handy receptacle I scoot under the hole.  Hope your setup is similar........
share Top of the page Bottom of the page
301duster
Reg. Jan 2009
Posted 2010-11-12 7:31 PM (#127013 - in reply to #126956)
Subject: RE: ONAN -How to change oil


Veteran


Posts: 188
100252525
Location: Ingalls, Ks
I just started sucking the oil out using an oil suction gun. I bought a trailer that had one in it and couldn't figure out why. After a couple of times trying to get that plug in and out I came to my senses and started using the suction gun. May not be as good as pulling the drain plug it's close enough and a lot easier.
share Top of the page Bottom of the page
neugebaj
Reg. Nov 2010
Posted 2010-11-14 9:12 AM (#127054 - in reply to #126956)
Subject: RE: ONAN -How to change oil


New User


Posts: 2

Location: edwards, ms

Apparently my Microquiet 4000 book doesn't match the generator.  Even on the RV website.  The drain is right below the oil fill in front of unit, not below unit (no hole either- no hole under trailer for a second oil drain if there is one - so must have to use front oil drain).  Can anyone help - is there a latch to remove bottom pan the entire unit sits on so I can drain in another pan?

Many thanks to all that helped.

share Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [25 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread
Message format
 

'
Registered to: Horse Trailer World
(Delete all cookies set by this site)