RVQ Grille QUESTION! gard, retento, Paul, Trevesto, anybody!

Home of the Horse Trailer Blue Book

You are logged in as a guest. Logon or register an account to access more features.

OTHER FORUMS: Barrel Horses - Trucks - Cutting - Reining - Roping

RVQ Grille QUESTION! gard, retento, Paul, Trevesto, anybody!

Jump to page : 1 2
Now viewing page 2 [25 messages per page]

Last activity 2009-07-29 11:15 AM
29 replies, 10803 views

View previous thread :: View next thread

General Discussion -> Trailer Talk Click to return to Barrel Talk

Message format

retento
Reg. Aug 2004

Posted 2009-07-29 9:15 AM (#108712 - in reply to #108580)
Subject: RE: RVQ Grille QUESTION! gard, retento, Paul, Trevesto, anybody!

Expert

Posts: 3802
2000

Location: Rocky Mount N.C.

quote.... Do they have a built in regulator or restricter? Similar to a propane/natural gas restricter on a gas oven?

It may have a Natrual gas orfice in it rather than an L.P. orfice..... The NG orfice is alot smaller than the LP. That would slow things way down...

0 likes

gard
Reg. Aug 2007

Posted 2009-07-29 9:29 AM (#108714 - in reply to #108580)
Subject: RE: RVQ Grille QUESTION! gard, retento, Paul, Trevesto, anybody!

Expert

Posts: 5870
5000

Location: western PA

Something is going on in that valve to restrict the flow; whether it's inoperative, damaged or restricted. It should be easy to swap out, and probably could be modified.

0 likes

hogtownboss
Reg. Sep 2008

Posted 2009-07-29 10:13 AM (#108718 - in reply to #108580)
Subject: RE: RVQ Grille QUESTION! gard, retento, Paul, Trevesto, anybody!

Expert

Posts: 1351
1000

Location: Decatur, Texas

I told you I was a retard! After checking everything, going to the propane place down the road then to the RV shop. Then getting mad and pulling the temp control apart 3 times still not figuring it out. I pulled it apart a 4th time and realize that the little screw on the top does not hold the knob on, it actually is to adjust the flow of gas going thru the valve!!