Posted 2009-01-16 12:06 PM (#97623) Subject: want to convert livestock trailer to enclosed
New User
Posts: 1
Location: staplehurst, nebraska
wondering if there is a kit or something to convert my 16ft titan stock trailer into an enclosed trailer by purchasing material to cover slots in sides. I'm sure I seen this somewhere before but can't find it anywhere on the net. thanks
Posted 2009-01-16 12:38 PM (#97625 - in reply to #97623) Subject: RE: want to convert livestock trailer to enclosed
Expert
Posts: 5870 Location: western PA
I enclosed the slats on a Cornpro, by cutting and fitting individual Lexan window panels between the studs. Some manufacturers have a track set up wherein you can insert a single long strip. Check with your trailer's manufacturer to see what he has available.
Posted 2009-01-16 1:13 PM (#97626 - in reply to #97623) Subject: RE: want to convert livestock trailer to enclosed
Regular
Posts: 64 Location: Oklahoma City
The aluminum track for plexiglass inserts is called H channel or F channel & is available from Statewide Aluminum in 16-20' lengths. Install the track inside or outside depending on your trailer configuration and then you can slide plex inserts (Lexan) into the tracks and seal the sides of the trailer.
want to convert livestock trailer to enclosed
