Posted 2008-08-21 9:44 AM (#90105) Subject: Middle part of Bumper Pull
Veteran
Posts: 219 Location: Mt. Clemens, MI 48043
I need help with this since I have never done this before. How do you remove the middle part on a bumper pull? It is a two horse and a older model. Any advice would help. I do not have the model number. Thank you in advance.
Posted 2008-08-21 10:05 AM (#90107 - in reply to #90105) Subject: RE: Middle part of Bumper Pull
Expert
Posts: 2957 Location: North Carolina
You want to remove the divider of a two horse straight load BP trailer ??
Usually there are pins that hold the divider at the head end and upper tailer end. One trailer I helped with, had a tab at the tail end that fit into the floor. The whole divider had to move backwards a bit to disengage the tab. A name or pictures of your trailer would surely help get someone who is familar with your trailer to post.
You can easily post pictures into an album on this site.
Posted 2008-08-21 4:28 PM (#90136 - in reply to #90111) Subject: RE: Middle part of Bumper Pull
Expert
Posts: 1391 Location: North of Detroit, MI
Older BP 2H trailers may not have completely removeable dividers. 2 of mine, the body section came out, but not the divider between the heads. And, the post at the back stayed put too.
Middle part of Bumper Pull
