Posted 2006-11-22 12:36 PM (#51795 - in reply to #51785) Subject: RE: Hitch ball size for Brenderup
Member
Posts: 31
Location: Nashville, TN
I can answer that....2" diameter ball. And the top of the ball needs to be 17-19" from the ground. 18" is ideal, mine is 17.75" and worked like a charm.
Posted 2006-11-22 1:42 PM (#51800 - in reply to #51785) Subject: RE: Hitch ball size for Brenderup
Extreme Veteran
Posts: 333
Learn from my mistakes, too.. I needed a two inch ball to pick up my new trailer, but when I got there the hitch wasn't a side close type, it was a top close with a lip around the ball area. My drop hitch didn't have enough clearance between the ball and the back of the dropped part, and I had to go get another drop hitch and ball to haul my treasure home. Luckily it was a Saturday and I got the tire store to tighten down the ball so I could make the 70 mile drive home.
Might want to take two hitches, two balls and go on a day places are open so that you can switch them if need be.
Posted 2006-11-23 10:01 PM (#51845 - in reply to #51785) Subject: RE: Hitch ball size for Brenderup
Regular
Posts: 87
Location: Novato, California
It definitely takes a 2" ball. You should check the web site I think the ball height should be 19" from the ground to top of the ball. I believe I was told "that is with a fat man on the bumper" but check the web site.
Posted 2006-12-06 9:24 AM (#52246 - in reply to #51785) Subject: RE: Hitch ball size for Brenderup
Member
Posts: 31
Location: Nashville, TN
You probably should call the Bup place in Midland TX. Their contact info is on the website. Their website specifies 17-19" from the ground to the top of the ball. But call or email them. They are very nice.