'
1
Forums Albums Skins 1
Search Register Logon


You are logged in as a guest. Logon or register an account to access more features.
OTHER FORUMS:    Barrel Horses  -   Trucks   -   Cutting  -   Reining  -   Roping 
'
Best extra tall & extra wide trailers

Jump to page : 1
Now viewing page 1 [25 messages per page]
Last activity 2006-10-29 7:00 AM
3 replies, 3714 views

View previous thread :: View next thread
   General Discussion -> Trailer Talk  Click to return to Barrel Talk
Refresh
Message format
 
bizziecs
Reg. Oct 2006
Posted 2006-10-28 6:22 PM (#50777)
Subject: Best extra tall & extra wide trailers


Member


Posts: 6

Location: Waddell, Az.
I am looking to hopefully find a good used gooseneck trailer.  I am interested in a 3 horse slant.  I am not sure of the height I need to go for.  Have warmbloods, but not huge ones.  About 16 hands max and my filly will end up at about 1150-1200 lbs.  I thought 7 foot may work but now after reading some posts perhaps I should go 7' 4" to 7'6".  I have been thinking about Hawk trailers although used are hard to find.  I hear 4 Star are good too.  Any thoughts on who makes the oversized trailers and what manufacturers you prefer?  Many thanks!
share Top of the page Bottom of the page
loveduffy
Reg. Feb 2006
Posted 2006-10-28 10:04 PM (#50786 - in reply to #50777)
Subject: RE: Best extra tall & extra wide trailers



Expert


Posts: 1871
10005001001001002525
Location: NY
I have a eby trailer extra tall the wide is stander. the other  trailer i liked was jamco just could not a fored new $$$$$. sundowner also look well made. good luck
share Top of the page Bottom of the page
heritagelanefarm
Reg. Jul 2006
Posted 2006-10-29 6:18 AM (#50789 - in reply to #50777)
Subject: RE: Best extra tall & extra wide trailers


Veteran


Posts: 282
100100252525
Location: southcentral pennsylvania

Greetings,

My Stidham is 7'6" tall and extra wide. I would NOT go with a smaller trailer. In the heat and humidity of the summer, the extra area available for air circulation makes a big difference. My biggest boy is 16-1. Also, the bigger trailer seems more inviting for the horses, who jump right on!

Enjoy your search!

Brenda

share Top of the page Bottom of the page
Reg
Reg. Oct 2003
Posted 2006-10-29 7:00 AM (#50790 - in reply to #50777)
Subject: RE: Best extra tall & extra wide trailers


Expert


Posts: 2689
2000500100252525
Originally written by bizziecs on 2006-10-28 6:22 PM

I am looking to hopefully find a good used gooseneck trailer. I am interested in a 3 horse slant. I am not sure of the height I need to go for. Have warmbloods, but not huge ones. About 16 hands max and my filly will end up at about 1150-1200 lbs. I thought 7 foot may work but now after reading some posts perhaps I should go 7' 4" to 7'6". I have been thinking about Hawk trailers although used are hard to find. I hear 4 Star are good too. Any thoughts on who makes the oversized trailers and what manufacturers you prefer? Many thanks!



Hi and Welcome to the Forum.
I have 4-Star and Jamco, both are 7ft 6in high AT THE WALL and another couple of inches at the peak. These have both worked well with horses to 17.2.

Not cheap trailers, but in the scale of all else horsey, not a HUGE additional investment.
I figure it is usually lower cost in the long term to get "better" items than to scrimp on cheaper ones, lose money and THEN get the better item anyway.

{though they're still "investments in depreciating assets" (-: }

re: extra air and thermal density;
It isn't just the height and width, slant load trailers allow more horse weight per foot of floor. If this is a concern either get a trailer with one more stall than you need or go for a straight load.
"Face Space" is a HUGE benefit of the head to head configuration.


Edited by Reg 2006-10-29 7:07 AM
share Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [25 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread
Message format
 

'
Registered to: Horse Trailer World
(Delete all cookies set by this site)