Can anyone provide feedback on the EXISS 3 Horse Express Bumper Pull - CXF Edition trailer? A good friend is looking to purchase one and I was hoping someone has some experience that they can share.
The empty weight of 3100 lbs with a GVWR of 7000 lbs (with 2 x 3500 lb axles) may be a bit of a fine line.
Comments appreciated on your experience with this model.
Posted 2017-04-27 7:55 AM (#169824 - in reply to #169820) Subject: RE: EXISS 3 Horse Express BP - CXF Edition – Feedback Request?
Elite Veteran
Posts: 720
I haven't seen one of the trailers, so cannot tell you about them. But many 3H bumper pulls carry that same axle. With a GVWR of 7,000#, which is the weight on the ground itself, plus 10% or more tongue weight, that gives you 7700# of capacity. Minus the 3100# equals 4600# for three horses and tack. Sufficient I'd say.
Now- virtually any receiver hitch rated for over 5,000# requires it to be used as weight distributing. Just saying...
EXISS 3 Horse Express BP - CXF Edition – Feedback Request?
