Posted 2014-11-14 9:29 PM (#161574) Subject: Need new truck fender
Extreme Veteran
Posts: 402 Location: Valentine, NE
Did an oops and needing to replace the fender on our Chevy 4500 flatbed wheel well. Is stainless fender extension bolted to the flatbed. Looks real easy to replace. Have contacted conversion company but wanting to do a little price shopping.
Posted 2014-11-16 7:58 PM (#161594 - in reply to #161574) Subject: RE: Need new truck fender
Expert
Posts: 1351 Location: Decatur, Texas
Originally written by Spin Doctor on 2014-11-14 9:29 PM
Did an oops and needing to replace the fender on our Chevy 4500 flatbed wheel well. Is stainless fender extension bolted to the flatbed. Looks real easy to replace. Have contacted conversion company but wanting to do a little price shopping.
Anyone know where to look?
Thanks.
What conversion company built the truck? Around here there is only a couple of different bed makers that build beds for truck conversion companies. ie; what was Regency Conversions used beds from Kings Truck beds in Boyd,Texas and CM out of Madill,Ok. Western Hauler and 2L also used Kings Beds as well.
Posted 2014-11-17 10:21 AM (#161603 - in reply to #161602) Subject: RE: Need new truck fender
Expert
Posts: 1351 Location: Decatur, Texas
Originally written by Spin Doctor on 2014-11-17 10:00 AM
Laredo...still waiting on them to call me back.
I will try down here. They are only 20 mins. from me and they either used Kings or CM their trucks.I think left and right are the same but let me know which side you need.
Posted 2014-11-17 10:24 AM (#161604 - in reply to #161603) Subject: RE: Need new truck fender
Expert
Posts: 1351 Location: Decatur, Texas
I will try down here. They are only 20 mins. from me and they either used Kings or CM their trucks.I think left and right are the same but let me know which side you need.Year model too. If you can email me a picture or a couple of pictures of the bed and I can figure out who made it. something like a side / rear view on the corner would help.
Posted 2014-11-17 10:40 AM (#161605 - in reply to #161574) Subject: RE: Need new truck fender
Expert
Posts: 1351 Location: Decatur, Texas
Originally written by Spin Doctor on 2014-11-14 9:29 PM
Did an oops and needing to replace the fender on our Chevy 4500 flatbed wheel well. Is stainless fender extension bolted to the flatbed. Looks real easy to replace. Have contacted conversion company but wanting to do a little price shopping.
Anyone know where to look?
Thanks.
I FOUND IT! They are only about 20 mins. from me.King's Truck Beds, Boyd, Texas 940-433-2360I just talked to them and they have the fenders in stock and will sell direct!You can also see pictures on their website too.www.bobkingstruckbeds.com
Need new truck fender
