'
1
Forums Albums Skins 1
Search Register Logon


You are logged in as a guest. Logon or register an account to access more features.
OTHER FORUMS:    Barrel Horses  -   Trucks   -   Cutting  -   Reining  -   Roping 
'
Strange short between '13 Ford and stock trailer

Jump to page : 1
Now viewing page 1 [25 messages per page]
Last activity 2013-06-07 10:33 AM
2 replies, 2757 views

View previous thread :: View next thread
   General Discussion -> Trailer Talk  Click to return to Barrel Talk
Refresh
Message format
 
Spin Doctor
Reg. Nov 2008
Posted 2013-06-07 9:22 AM (#152530)
Subject: Strange short between '13 Ford and stock trailer


Extreme Veteran


Posts: 402
100100100100
Location: Valentine, NE
Have an new '13 Ford. When hooked to our stock trailer, the lights work fine until you apply the brakes. Lights than go off until you let off the brakes--doesn't matter if you hit the factory brake controller or not. Brakes work fine.

Have run all the wires, hooked trailer to another vehicle, hooked the '13 to another trailer and they all work fine....Has to be in the plug is my thought but have lubed, spread prongs, removed, reattached wires, etc but no luck.

Driving me batty!!! Thoughts?
share Top of the page Bottom of the page
PaulChristenson
Reg. Jan 2007
Posted 2013-06-07 10:24 AM (#152534 - in reply to #152530)
Subject: RE: Strange short between '13 Ford and stock trailer


Expert


Posts: 3853
200010005001001001002525
Location: Vermont
BAD ground
share Top of the page Bottom of the page
PaulChristenson
Reg. Jan 2007
Posted 2013-06-07 10:33 AM (#152537 - in reply to #152534)
Subject: RE: Strange short between '13 Ford and stock trailer


Expert


Posts: 3853
200010005001001001002525
Location: Vermont
There's another possibility. Assume the trailer ground is completely open. With running lights only, there's a current path through the trailer running lamp, trailer stop lamp, truck stop lamp. With brakes only, there's a current path through trailer brake lamp, trailer running lamp, truck stop lamp. With both, there's no path back through the truck because everything is at 12 V.

Edited by PaulChristenson 2013-06-07 10:35 AM
share Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [25 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread
Message format
 

'
Registered to: Horse Trailer World
(Delete all cookies set by this site)