Trying to finish our livingquarters. Wondering if anyone has purchased the wall board that looks like leather? Where did you find it? We had plan to use the soft touch vinyl,but long horn conversions would not quarantee that they would be able to fill our order at least not at the present time. They suggested this instead.
Thanks
Posted 2011-03-17 6:53 PM (#131788 - in reply to #131787) Subject: RE: leather look wall board
Veteran
Posts: 123
Location: illinois
Thanks for the info. we'll have to try our local Menards. I phoned a couple of the web-sites that Painted Horse suggested pretty pricey. I just wanted to keep all of our options opened.
Posted 2011-03-20 10:38 AM (#131877 - in reply to #131737) Subject: RE: leather look wall board
Member
Posts: 16
Location: braham,mn
HORSEYHIEDI; I like the product on your cieling, how did you guys attach it ? We are also doing our trailer... Funny, your pics are nearly identical to ours.
Posted 2011-03-20 7:21 PM (#131893 - in reply to #131877) Subject: RE: leather look wall board
Member
Posts: 47
Location: Findlay, OH
Thanks! We insulated the ceiling. Then put studs on it. We cut each piece of paneling to fit. Then we applied lock tight glue to the inside parts of the panel. We then screwed the outside pieces to the studs. We then left it overnight with a "t" shaped board that we made to hold up the middle while it dried. I applied the matching tape to the seams after it was dried. We are taking alot of info from the Toddwrench site & filing in the rest from this forum. It's definately a learning process. Good luck on your identical trailer too!