Posted 2010-11-08 5:24 PM (#126825) Subject: Trailer brakes locking up
Member
Posts: 17
Location: Naples FL
I have just replaced a complete axle assembly including electric brakes but the brakes lock up and will not release unless the wheel is reversed, the other axle brakes work fine does anyone know why this could happen?
Posted 2010-11-10 3:07 AM (#126885 - in reply to #126825) Subject: RE: Trailer brakes locking up
Expert
Posts: 3853
Location: Vermont
Originally written by 11Snowbird on 2010-11-08 6:24 PM
I have just replaced a complete axle assembly including electric brakes but the brakes lock up and will not release unless the wheel is reversed, the other axle brakes work fine does anyone know why this could happen?
You did put the identified LH brake on the driver's side and the RH brake on the passenger side?...The magnet unit is on the bottom of both plates, correct? You have properly adjusted the brakes? http://www.youtube.com/watch?v=JeD6KKibdmw