Ok, I have my trailer cleaned out and ready to start the LQ area. According to what I got on here, my old Sooner Dynasty has FRP walls in the dressing room area. Question is from what I read, the walls are fiberglass with plywood in the middle. Would that be suitable enough insulation by itself for the walls, or should I insultae over the FRP before I putt wall coverings on? I still plan to insulate the ceiling, floor, bed are, etc either way. Would it make much difference if I dont insulate the walls (the ones on either side of the GN)
Posted 2009-03-17 8:30 PM (#101633 - in reply to #101518) Subject: RE: FRP walls
Extreme Veteran
Posts: 434 Location: Brooksville, Fl
I am by NO means an expert, but I have observed the FRP to be a great insulator. I had a friend with a 2 horse with at least an FRP roof (can't remember if the whole trailer was FRP or not) and after a 2 hour trip in the hot Fl summer with 2 horses it was amazingly comfortable inside that trailer. I would guess you would probably not need to insulate it but, like I said, I'm no expert on it.
FRP walls
