Posted 2008-08-25 10:12 AM (#90314) Subject: Removing Old Decals
Member
Posts: 19
Location: Pennsylvania
Does anyone have any suggestions on how to remove an old decal without scratching the paint or aluminum? We have an Exiss trailer and the logo decal is coming off. We have since receive a new decal to put on from Exiss, but we are afraid of scratching the trailer while trying to get the decal off. Any suggestions is appreciated.
Posted 2008-08-25 10:21 AM (#90316 - in reply to #90314) Subject: RE: Removing Old Decals
Location: Where the wind comes sweepin' down the plain...
Use a blow dryer to heat it up as you pull it off. Lots of times it will come off in one piece. If it leaves behind a glue residue, you can use a tar and bug remover or goof off to remove that. Clean the area with alcohol before you apply the new decal.
Posted 2008-08-26 5:25 PM (#90449 - in reply to #90316) Subject: RE: Removing Old Decals
Expert
Posts: 2615
Originally written by Tresvolte on 2008-08-25 10:21 AM
Use a blow dryer to heat it up as you pull it off. Lots of times it will come off in one piece. If it leaves behind a glue residue, you can use a tar and bug remover or goof off to remove that. Clean the area with alcohol before you apply the new decal.