Posted 2008-08-06 2:46 PM (#89143 - in reply to #89136) Subject: RE: Pass Thru Doors?
Veteran
Posts: 150
Location: Farmville, VA
I installed one this past spring. Bought it after market and love it! It was under $400 delivered to my office. It is white alumn. on the horse side and white fiberglass on the inside of the dressing room. I'll try and find the original post w/pictures if your interested. I think it's under Walk thru door DIY?
Posted 2008-08-06 3:15 PM (#89145 - in reply to #89136) Subject: RE: Pass Thru Doors?
Veteran
Posts: 140
Location: NM
Thanks for the pictures! It looks a lot like the door I am looking at - is your's from the featherlite dealer?
I am concerned that the one I am looking at isn't one that should be installed in a horse trailer but only in an RV. I think the door I am looking at is all fiberglass and I am wondering if it is strong enough.
Posted 2008-08-06 4:07 PM (#89146 - in reply to #89136) Subject: RE: Pass Thru Doors?
Veteran
Posts: 150
Location: Farmville, VA
Mine came from Universal Trailers. They actually sell Exiss, but this is an after market generic door (and not the most expensive one) and I installed it into a Sundowner. I would stick with the metal on the horse side. I have been very pleased with the quality. I can give you the name and toll free number if you like.
Posted 2008-08-07 9:19 PM (#89247 - in reply to #89136) Subject: RE: Pass Thru Doors?
Regular
Posts: 84
Location: Crestwood, KY
My hubby installed a walk-thru door on ours. It is aluminum skin on both sides, but the inside is styrofoam. We don't generally haul a horse in the first slot, so I wasn't worried about the strength of it. Anyway- we got ours for ~$70 from a RV surplus store. It was easy to install, and just happens to match the existing wall in the trailer. Might be worth looking around for one that way to save some money...