7ā4āā Tall x 6ā8āā Wide x 22ā Long
GVWR: 14,000 lbs.
Approx. Shipping Weight: 6,028 lbs.
TRAILER STANDARD FEATURES:
*Aluminum sidewall posts, top rail, near hoop, bottom rail
*1 1/2āā deep aluminum side wall posts
*4āā cross members, typically on 10āā centers
*Extruded aluminum floor on trailer belly
*.100 aluminum floor in bunk
*.040 white exterior aluminum skin forward of stock area and in the bunk area
*Full-height extruded aluminum sides in stock area with two upper air gaps
*One-piece aluminum roof
*7-way bargeman cord for trailer lights
*Break-away emergency brakes switch
*Emergency brake-away battery w/ plastic box
*Coupler designed for 2 5/16āā ball
*Safety chains
*10 degrees up Dexter EZ-Lube torsion axles
*Electric brakes on all wheels
*Racial tires w/ (4) steel wheels & steel wheel for spare
*Exterior running boards on road and curb side
*Tear-drop style fenders
*Access door on front roadside of stock area
*Heavy-duty aluminum hinges on all access door & rear gate
*Heavy-duty cam bar on rear gate, butterfly latch on access door
*Lower outside rear hoop reinforcements w/ dock bumpers
*Center swing gate
*Center gate latch w/ outside operation
*Center gate lower stops w/ support for when gate is in the open and closed positions
*Square corner entry door to dressing room
*Removable saddle rack with (3) saddle seats
*Partition wall with Ballistic line on stock side
*Single manual crank jack
*3āā rubber bumper at bottom side of rear hoop
*(1) 12v light installed above dressing room door
*(1) 12v light installed front & center of bunk up high
*(1) 12v load light over the rear loading door
*4āā tall flip-up gate at riser wall
*Rear door to be a full swing door with two air gaps & slider
*Drive on trailer tire changing assistant
*(1) 12v stall light centered in every stock section
*License plate light
*LED clearance lights (including upper and lower)
*Fender light on top of each fender
*(2) sets of LED stop/tail lights
*Red and white Conspicuity reflective tape
*Carpet on riser wall and bunk floor in the dressing room. Dressing room models have a flip-down step cleat on riser wall
*Dressing room models standard with entry door w/o screen, bunk windows (non-egress), saddle rack with (3) saddle bosses, brush box, 12v light in bunk and curb-side dressing room wall
*2-year hitch to bumper warranty
*8-year structural warranty
TRAILER UPGRADES:
*Stainless steel nose wrap
*Tandem 7,000 lb. axles
*16āā, 8-lug black aluminum wheels with Westlake range āEā tires (ST235/80R16)
*Rubber mats in stock area
*Plexiglas tracks in air gaps
*Larger high-intensity LED lights (Hux lights) in stock area
*Tie rail high on road side in stock area
*Additional 3-tiered saddle rack in mid-tack
*Larger high-intensity LED lights (Hux lights) in dressing room
*Floor length to 22ā
*Split tack w/ overlapping doors on curb-side
*(3) horse dividers on 40āā center ILO stock gate
*(4) exterior tie rings each side
