Price: $0 Year: 2025 Make/model: BAR-M ES 20SL Horses: 2 Pull Type: B Liv Qtrs: No Trailer Length: 0' Location: North Jackson, Ohio Stock #: 43662
Contact Info
Contact: Leonard Truck and Trailer Phone: 877-888-6069 Email: esales@leonardtrailers.com
Description:
Stock# 43662
New 2025 Bar-M ES 20SL Bumper Pull Horse Trailer
Model:ES 20SL
Warranty:
2yr-Merhow Living Quarters
8yr- Structural
Horse Area Standards:
High-density horse armor lining on all walls (48” tall).
Rear load door to have horse armor lining full height inside.
Side access door includes rubber low and white sheet above on inside (models with access door only).
White aluminum sheet above horse armor lining on partition wall.
No lining or insulation on road or curb side wall.
Cove covers to enclose the top rail on road and curb sides of the horse area.
(1) Slim-line LED stall light per stall, installed on cove on curb side.
Airflow dividers with stall pads on each side or every divider.
Drop-down feed window at head side of each stall.
Radius slider window at the butt side of each stall, including bar guards.
(2) Horse ties in the horse area above each drop-down feed window.
(2) Horse ties in the horse area above access door (models with access door only).
Rear door single with two slider windows.
Exterior Standards:
Rear door single with cam bar.
Rear docking bumper below the rear doors.
Running boards on road and curb sides.
Single load light with switch in rear hoop above curb side load door (Powered by recharge line).
License plate light over the road side tack room door.
Location for license plate on road side tack room door up high.
Complete automotive-style wire harness.
(1) Set of LED turn/stop/tail-lights, low on each side of the unit.
(1) LED ID bar centered on rear hoop top (left/right turn, stop, and tail lights).
(1) Switch in rear hoop for the stall lights.
Aluminum fender with top-side mounted fender light.
(1) Exterior horse tie per stall.
Drop-down feed window hold-down (1) at each drop-down feed window.
Door hold-back on each of the rear doors and (1) at access door if applicable.
Three-piece skin-colored nose sheet (center sheet is riveted at the seams).
Large Bar-M nose decal (centered on unit, up high, center sheet is riveted).
(2) Red reflectors – one installed on road side rear, one on curb side rear, mid-way up.
(2) Amber reflectors – one installed on road side front, one on curb side front, mid-way up.
(2) Amber reflectors – one installed on road side nose, one on curb side nose, just below top rail.
Bar-M logo on top rail, both road and curb sides near the rear of the trailer on the top rail.
Bar-M logo installed on curb side door, down lower curb side of door.
Red/white conspicuity tape along the entire bottom side of road and curb side rear doors.
Red/white conspicuity tape along the lower side of road and curb side walls (in sections).
Top crank jack with wheel.
Coupler for 2 5/16" ball, safety cables, emergency break-away battery (with charger) and switch.
Diamond plate nose guard.
Optional Equipment List:
Ramp behind full-height rear doors.
6' Hay-rack (No floor).
Upgrade the butt window in the 1st stall.
Upgrade the butt window in the 2nd stall.
Upgrade the butt window in the 3rd stall.
Add an additional load light centered over the roadside horse area.
Add an additional load light centered over the curbside horse area.
Add an additional load light centered over the roadside rear tack door.
Add a walk-thru door in the partition wall between the horse area and the dressing room.
Add a Bauer cam back lock box (price per box).
Add a 3-tier aluminum blanket bar on the rear tack room door.
Add an additional set of (8) bridle hooks in the dressing room.
Add an additional set of (8) bridle hooks in the rear tack.
Add an additional saddle seat to the saddle rack (max is 6; price is per seat).
Add an additional brush box to the rear tack.
Add an additional brush box to the dressing room.
Charcoal skin upgrade from white skin.
Extruded slat in the horse area (2 Horse).
Extruded slat in the horse area (3 Horse).
Upgrade to aluminum wheels (Does not include the spare).
Add an access door in the first stall, head side (2 Horse model only).
Add a lower divider on the first divider.
Replace the full-height cam bar on the access door with a camper door handle and butterfly latch.
Add 7” of length to dressing area, make trailer 7’ tall, make dressing room door 36” (Trailer cannot be over 11’1” tall).
Add a swing-out saddle rack with a blanket bar below each rack.
Add hat rack and clothes rod.
Delete the rubber mats from the horse area.
Add an electric jack with battery and battery box.
Remove rear tack, make rear door single with two windows, line and insulate above kit liner.
Add carpet to the slant wall lower bridle hooks 1' lower.
No roof vents for clearance issues.
Add extra light to dressing area (total of 2) with an exterior switch.
Add additional load light over the dressing room door with an exterior switch.
Trailer will have two load lights over the rear door with an exterior switch.
Upgrade spare to an aluminum wheel.
We offer outstanding financing options, accept trades, and can arrange nationwide NO HASSLE delivery!
Inquire today for more information! (888) 333-6613
**We believe these specifications to be accurate. Any discrepancies are unintentional. Please verify information with a sales associate prior to purchase.**
