-
Curbside access door toward the front side of the front stock area.
-
Curbside access door with cam bar and lockable hasp.
-
Curbside access door installed with three heavy-duty 5" X 5" hinges.
-
Rear swing gate with slider, including matching air space.
-
Rear swing gate with slider installed with four heavy-duty 5" X 5" hinges.
-
Rear swing gate with heavy-duty steel cam lock.
-
License plate light curbside of the rear gate (lower section of the trailer).
-
License plate location on curbside of rear gate (lower section).
-
Single LED turn/stop/tail-light installed about 18" above stock area floor.
-
(1) Switch in rear hoop for stall lights.
-
Tear-drop style aluminum fender with top-mounted amber/red fender light.
-
Large Bar-M nose decal installed on the front of the trailer.
-
(2) Red reflectors: one on road side rear and one on curb side rear (midway up).
-
(2) Amber reflectors: one on road side front and one on curb side front (midway up).
-
(2) Amber reflectors: one on road side nose and one on curb side nose (just below top rail).
-
Bar-M Logo on top rail (both road and curb sides near rear of trailer).
-
Bar-M Logo on roadside rear slider door (midway of door).
-
Red/White conspicuity tape along the entire bottom side of rear gate and rear slider.
-
Red/White conspicuity tape along the lower side of road and curb side walls (in sections).
-
Top crank jack with wheel.
-
Coupler for 2 5/16" ball. Safety cables, Emergency breakaway battery with charger and switch.
-
Diamond plate nose guard.
-
Automotive-style wiring harness.
-
(12) Upper clearance lights: 2 on rear, 3 on road & curb side top rail, 4 on front nose top-rail.
-
(2) Lower clearance lights (down low): 1 on curb side, 1 on road side.
-
(2) Lower clearance lights (down low): 1 on curb side, 1 on road side.
