'
1
Forums Albums Skins 1
Search Register Logon


You are logged in as a guest. Logon or register an account to access more features.
OTHER FORUMS:    Barrel Horses  -   Trucks   -   Cutting  -   Reining  -   Roping 
'
Hydraulic lift

Jump to page : 1
Now viewing page 1 [25 messages per page]
Last activity 2021-09-26 1:13 AM
11 replies, 4495 views

View previous thread :: View next thread
   General Discussion -> Trailer Talk  Click to return to Barrel Talk
Refresh
Message format
 
Kwarne
Reg. Apr 2013
Posted 2018-06-14 11:30 PM (#171667)
Subject: Hydraulic lift


New User


Posts: 1

Trying to decide my options... so asking for Pros and cons to a dual leg hydraulic lift which can operate the legs independent of each other for leveling... vs a single leg...?  Is it worth the extra money?  ~$1100
share Top of the page Bottom of the page
cajunmuleman
Reg. Oct 2011
Posted 2018-06-15 4:43 AM (#171668 - in reply to #171667)
Subject: RE: Hydraulic lift



Elite Veteran


Posts: 656
5001002525
Location: Rayne, LA
I think it depends on where you will park ( how level ) and do you want the added stability?
share Top of the page Bottom of the page
TS351
Reg. Apr 2014
Posted 2018-06-15 8:17 AM (#171669 - in reply to #171667)
Subject: RE: Hydraulic lift


Regular


Posts: 56
2525
Location: Belchertown MA
At least in my experience the jacks only level the trailer front to back, side to side leveling is done with blocking tires, once trailer is level side to side you level it front to back with the jack. So either would do the same for leveling but with the duals you will have more stability as mentioned before.We have duals that work together but self level to  what the terain is that we are on,we have a slide out so they help with stability.  
share Top of the page Bottom of the page
RTSmith
Reg. Nov 2003
Posted 2018-06-15 8:18 AM (#171670 - in reply to #171667)
Subject: RE: Hydraulic lift


Elite Veteran


Posts: 784
500100100252525
Location: Tenn/Ala.
You need to level your treailer side to side by shimming the rear tires. As in driving up on a block. That will automatically level the front. Trying to level from the front, will only serve to twist your trailer- not a good thing.

Now- double jacks with 2 controls are fine. Just don't plan on leveling with them. Most of the newer double jacks with 1 control do a good job of self equalizing to allow for uneven ground. But sometimes a trailer that is significantly heavier on one side may be better served with 2 controls. 
 
share Top of the page Bottom of the page
RockyMountain ride
Reg. May 2018
Posted 2018-06-16 1:11 AM (#171672 - in reply to #171667)
Subject: RE: Hydraulic lift


New User


Posts: 4

Thank you all for your answers. Sure helps to bounce questions off people with experience.
share Top of the page Bottom of the page
PaulChristenson
Reg. Jan 2007
Posted 2018-06-17 6:22 AM (#171673 - in reply to #171667)
Subject: RE: Hydraulic lift


Expert


Posts: 3853
200010005001001001002525
Location: Vermont
Kwarne - 2018-06-15 2:30 AM Trying to decide my options... so asking for Pros and cons to a dual leg hydraulic lift which can operate the legs independent of each other for leveling... vs a single leg...?  Is it worth the extra money?  ~$1100
http://www.thebigfootleveler.com/gooseneck-trailers.html

Edited by PaulChristenson 2018-06-17 6:25 AM
share Top of the page Bottom of the page
HOUSE
Reg. Oct 2008
Posted 2018-06-19 2:13 PM (#171674 - in reply to #171667)
Subject: RE: Hydraulic lift


Veteran


Posts: 183
100252525
Location: riverside ca
I find dual legs useless for leveling, that said they add a huge amount of stability to the trailer when jacked up.  Also I would assume that if you are talking about a heavy trailer as most of mine are that there is much less stress on the trailer when lifted as the jacks are much closer to the frame rails rather than on a cross member.  No empirical data but, I feel it is safe to assume. 
share Top of the page Bottom of the page
HOUSE
Reg. Oct 2008
Posted 2018-06-20 2:01 PM (#171677 - in reply to #171667)
Subject: RE: Hydraulic lift


Veteran


Posts: 183
100252525
Location: riverside ca
just to be clear my equalizer systems 2 jack system only cost 1400 parts total.  The installation was pretty straight forward, because i was replacing broken crank jacks i had to the the brackets off the old jacks and weld them on the new jacks but it was super easy so I find it odd that you would be paying 1100 for adding the one leg.  however Hydraulic is the way to go! cranking sucks.
 
share Top of the page Bottom of the page
ralphden
Reg. Jun 2021
Posted 2021-09-18 10:47 AM (#184810 - in reply to #171667)
Subject: RE: Hydraulic lift


Member


Posts: 8

What to do when the hydraulics are leaking?
share Top of the page Bottom of the page
mariusjon
Reg. Sep 2021
Posted 2021-09-18 10:49 AM (#184811 - in reply to #171667)
Subject: RE: Hydraulic lift


New User


Posts: 2

Always reduce the pressure in the hydraulic system before checking.
share Top of the page Bottom of the page
mariusjon
Reg. Sep 2021
Posted 2021-09-20 7:55 AM (#184815 - in reply to #171667)
Subject: RE: Hydraulic lift


New User


Posts: 2

Always reduce the pressure in the hydraulic system before checking. This applies even if you see only a few drops on the ground. Relieving the stress minimizes the chance of hydraulic fluid escaping from the machine component during the inspection. Also, When repairing hydraulic systems, don't skimp on money or time. If it takes you time to acquire a native part to improve, it is worth the wait to take the time to purchase one. Trying to solve problems on the principle of availability of parts, you are knowingly going down the road of failure. Bad fittings are not always to blame for leaking fluid from the hydraulic system, even though fluid droplets can show up right there, so it's better to use the Ryco 24.7 Ingleburn
share Top of the page Bottom of the page
PaulChristenson
Reg. Jan 2007
Posted 2021-09-26 1:13 AM (#184900 - in reply to #171667)
Subject: RE: Hydraulic lift


Expert


Posts: 3853
200010005001001001002525
Location: Vermont
Leaking hydraulics can be dangerous if there is pressure in the system...unless you are extremely comfortable working on hydraulic systems...get a professional to fix it...:
share Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [25 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread
Message format
 

'
Registered to: Horse Trailer World
(Delete all cookies set by this site)