Posted 2017-05-16 11:48 AM (#169904) Subject: 06 Exiss Sport GN
I have a new (to me) 06 3H GN with a folding rear tack. I've had other Exiss trailers with folding rear tacks, but I can't figure out how to hold this one back. It's embarrassing to post this on a public forum but I'm about to tear my hair out! There's a pin on the left wall that presumably has something to do with this, but it matches in no way to the folding wall. Also, when folded back, the tack wall hits the pre-mounted (presumably by Exiss) light, so I am confused to how this works at all. It seems like there is a pin that does nothing and it folds back just to sit there with nothing to keep it in place, both of which seem absolutely implausible. I'm going to try and post pictures to illustrate, although it's actually pretty hard to show this. I'm hoping somebody on here just has one and can enlighten me!
Posted 2017-05-17 9:27 PM (#169912 - in reply to #169904) Subject: RE: 06 Exiss Sport GN
The edge of the tack is the center post, that's for sure. When it's folded back, there is no center post.
Thanks to a PM, I was convinced to force it back against that wall. It does in fact go if you make it, and is braced against the corner of that light. I guess my entire issue was I was sure 'that couldn't be right,' when in fact I guess it is. I can't imagine that a big heavy metal wall is going to ride against that tiny plastic light without detriment to the light.
Posted 2017-05-18 7:56 AM (#169914 - in reply to #169904) Subject: RE: 06 Exiss Sport GN
Location: Zionsville, Indiana
Are you sure that the spring loaded pin (that holds the wall in place as a tack wall) doesnt fasten into the dark colored "block" that you can see in the first picture fastened to a piece of aluminum welded into the roof support.
Jump to page : 1 Now viewing page 1 [25 messages per page]