'
1
Forums Albums Skins 1
Search Register Logon


You are logged in as a guest. Logon or register an account to access more features.
OTHER FORUMS:    Barrel Horses  -   Trucks   -   Cutting  -   Reining  -   Roping 
'
EXISS 3 Horse Express BP - CXF Edition – Feedback Request?

Jump to page : 1
Now viewing page 1 [25 messages per page]
Last activity 2017-04-27 7:55 AM
2 replies, 921 views

View previous thread :: View next thread
   General Discussion -> Trailer Talk  Click to return to Barrel Talk
Refresh
Message format
 
ThreeCW
Posted 2017-04-25 12:32 PM (#169820)
Subject: EXISS 3 Horse Express BP - CXF Edition – Feedback Request?


Regular


Posts: 89
252525
Location: Calgary, Canada
Can anyone provide feedback on the EXISS 3 Horse Express Bumper Pull - CXF Edition trailer? A good friend is looking to purchase one and I was hoping someone has some experience that they can share.

The empty weight of 3100 lbs with a GVWR of 7000 lbs (with 2 x 3500 lb axles) may be a bit of a fine line.

Comments appreciated on your experience with this model.

Here is a link to the spec sheet:
https://media.wix.com/ugd/7434a5_5d473aca17f3409fb38a8def98512dcb.pd...

Thanks !! 3CW

Top of the page Bottom of the page
Kay
Posted 2017-04-25 3:12 PM (#169821 - in reply to #169820)
Subject: RE: EXISS 3 Horse Express BP - CXF Edition – Feedback Request?


Extreme Veteran


Posts: 493
100100100100252525
Location: Zionsville, Indiana
A little light for three horses and their gear. Would be fine for two horses. Double check the axles to be sure they were listed correctly.
Top of the page Bottom of the page
horsey1
Posted 2017-04-27 7:55 AM (#169824 - in reply to #169820)
Subject: RE: EXISS 3 Horse Express BP - CXF Edition – Feedback Request?


Elite Veteran


Posts: 606
500100
I haven't seen one of the trailers, so cannot tell you about them. But many 3H bumper pulls carry that same axle. With a GVWR of 7,000#, which is the weight on the ground itself, plus 10% or more tongue weight, that gives you 7700# of capacity. Minus the 3100# equals 4600# for three horses and tack. Sufficient I'd say.

Now- virtually any receiver hitch rated for over 5,000# requires it to be used as weight distributing. Just saying...  
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [25 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread
Message format
 

'
Registered to: Horse Trailer World
(Delete all cookies set by this site)